Audio Signal in a sentence

(1) Interferential noise distorted the audio signal.

(2) The Gaussian noise was added to the audio signal.

(3) The balun improved the clarity of the audio signal.

(4) The speaker can actuate by means of an audio signal.

(5) The spectral power of the audio signal was analyzed.

(6) The Altec sound processor enhances the audio signal.

(7) The output method for this system is an audio signal.

(8) The speaker will emit after receiving an audio signal.

(9) The amplifier will amplify along the audio signal path.

(10) Muting yourself can help maintain a clear audio signal.

Audio Signal sentence

(11) Make sure to compand the audio signal before recording.

(12) I need to design a digital filter for this audio signal.

(13) The decoder was able to quickly decode the audio signal.

(14) Make sure to compand the audio signal to avoid clipping.

(15) The beam antenna provided a clear and crisp audio signal.

(16) I used headphones to listen to the audio signal privately.

(17) I adjusted the audio signal to eliminate background noise.

(18) Spectrograms are commonly used in audio signal processing.

(19) The sidebands of the audio signal were causing distortion.

(20) Make sure to compand the audio signal to maintain fidelity.

Audio Signal make sentence

(21) The unmodulated audio signal had a constant background hum.

(22) The audio signal was transmitted wirelessly to the speakers.

(23) The volt around the amplifier was boosting the audio signal.

(24) The preamp allows for precise control over the audio signal.

(25) The voice coil's movement is controlled by the audio signal.

(26) The impedance mismatch caused distortion in the audio signal.

(27) The array 'sarcoptes' can be used in audio signal processing.

(28) The audio signal was transmitted with distortionless clarity.

(29) The peak voltage of the audio signal was adjusted to 5 volts.

(30) The digital filter reduces the distortion in the audio signal.

Sentence of audio signal

(31) I adjusted the equalizer settings to enhance the audio signal.

(32) We used a preamp to amplify the audio signal before recording.

(33) I adjusted the audio signal to emphasize the bass frequencies.

(34) I adjusted the audio signal to create a surround sound effect.

(35) The ground loop disrupted the audio signal during the concert.

(36) The audio signal was transmitted via Bluetooth to the speakers.

(37) The amplifier is used to boost the voltage of the audio signal.

(38) Let's cord up the mixer cables to maintain a clean audio signal.

(39) The audio signal was distorted due to a faulty cable connection.

(40) The shaping circuit adjusts the phase shift of the audio signal.

Audio Signal meaningful sentence

(41) The high-order digital filter reduced noise in the audio signal.

(42) The software quantises the audio signal to a specific bit depth.

(43) Discretizing the audio signal improved the quality of the sound.

(44) We used a sound card to process the audio signal on the computer.

(45) The low cut feature on the mixer helps clean up the audio signal.

(46) The multivibrator circuit can be used in audio signal processing.

(47) The equalizers allow for precise adjustments to the audio signal.

(48) The electric wave interference caused static in the audio signal.

(49) The engineer will modulate out the distortion in the audio signal.

(50) Overmodulation can result in a loss of detail in the audio signal.

Audio Signal sentence examples

(51) It is important to compand the audio signal to prevent distortion.

(52) Overmodulation can result in a loss of clarity in the audio signal.

(53) We used a splitter to divide the audio signal between two speakers.

(54) After being demodulated, the audio signal became clear and audible.

(55) The output unit of the device produced a high-quality audio signal.

(56) The digital audio signal is transmitted through a fiber optic cable.

(57) The oscillographs helped analyze the distortion in the audio signal.

(58) The spectrogram displayed the frequency content of the audio signal.

(59) By demodulating the carrier wave, the audio signal can be retrieved.

(60) The amplifier introduced nonlinear distortion into the audio signal.

Sentence with audio signal

(61) The decoder decodes the audio signal to reproduce the original sound.

(62) The receiver will automatically demodulate the incoming audio signal.

(63) The retransmission of the audio signal resolved the distortion issue.

(64) An oscillographic technique is often used in audio signal processing.

(65) The shaping circuit filters out unwanted noise from the audio signal.

(66) Overmodulation can cause distortion and clipping in the audio signal.

(67) The amplifier is designed to amplify the voltage of the audio signal.

(68) I connected the audio signal from my phone to the car's stereo system.

(69) The modulator converts the audio signal into a modulated carrier wave.

(70) The convolve function is an important tool in audio signal processing.

Use audio signal in a sentence

(71) The speaker will actuate in accordance with the audio signal received.

(72) Overmodulation occurs when the audio signal exceeds the maximum level.

(73) Resynthesis is a key technique in the field of audio signal processing.

(74) The interpolative approach is commonly used in audio signal processing.

(75) The feedback amplifier helped to reduce distortion in the audio signal.

(76) The feedback amplifier allowed for precise control of the audio signal.

(77) The shaping circuit compensates for the distortion in the audio signal.

(78) The shaping circuit minimizes the phase distortion in the audio signal.

(79) The sonic delay line is a crucial component in audio signal processing.

(80) The electric wave frequency determined the quality of the audio signal.

Sentence using audio signal

(81) The peak voltage of the amplifier caused distortion in the audio signal.

(82) We used an amplifier to boost the audio signal for better sound quality.

(83) Spectral flux analysis revealed significant changes in the audio signal.

(84) The negative terminal of a speaker is where the audio signal is received.

(85) Overmodulation can result in a loss of dynamic range in the audio signal.

(86) The closed circuit ensured that the audio signal was transmitted clearly.

(87) The feedback amplifier helped in reducing distortion in the audio signal.

(88) The convertors were used to convert the audio signal from mono to stereo.

(89) The retransmissions of the audio signal were causing echoes in the sound.

(90) The audio signal was quantized to a lower resolution for storage purposes.

Audio Signal example sentence

(91) The audio signal was encoded in a compressed format for efficient storage.

(92) The low-pass setting on my amplifier helps to smooth out the audio signal.

(93) The preamplifier is typically located near the source of the audio signal.

(94) The instrumentation amplifier is commonly used in audio signal processing.

(95) The peak voltage of the audio signal was attenuated to prevent distortion.

(96) We should compand the audio signal before applying any effects or filters.

(97) We used the spectrogram to study the harmonics present in the audio signal.

(98) It is necessary to put on hold the tone frequency for a clear audio signal.

(99) The decoder was able to quickly decode the audio signal and play the music.

(100) Spectral subtraction is a widely used technique in audio signal processing.

Sentence with word audio signal

(101) The pre-emphasis filter boosted the treble frequencies in the audio signal.

(102) The amplitudes of the radio waves were modulated to carry the audio signal.

(103) The nonlinear distortion in the audio signal was caused by a faulty preamp.

(104) We should compand the audio signal before transmitting it over the network.

(105) The companding method is used to reduce the distortion in the audio signal.

(106) The amplifier boosts the power to increase the voltage of the audio signal.

(107) The attenuations in the audio signal caused a loss of clarity in the music.

(108) The negative terminal of an amplifier is where the audio signal is inverted.

(109) The exciter is designed to enhance specific frequencies in the audio signal.

(110) The feedpoint of the speaker system was where the audio signal was inputted.

Sentence of audio signal

(111) The feedback amplifier allowed for precise equalization of the audio signal.

(112) The high-order filter eliminated unwanted frequencies from the audio signal.

(113) The transmission path of the audio signal was distorted by background noise.

(114) The compander algorithm effectively compresses and expands the audio signal.

(115) Intermodulation distortion can cause unwanted harmonics in the audio signal.

(116) I adjusted the volume to ensure the audio signal was at an appropriate level.

(117) We used a microphone to capture the audio signal during the live performance.

(118) The engineer designed a circuit to amplify the harmonics of the audio signal.

(119) The digital filter can be used to remove echoes from a recorded audio signal.

(120) We used the spectrogram to study the frequency modulation in the audio signal.

Audio Signal used in a sentence

(121) The impulse response of a digital signal processor can shape the audio signal.

(122) Demodulating is necessary to retrieve the audio signal from a radio broadcast.

(123) Preamplifiers are typically placed at the beginning of the audio signal chain.

(124) I used a spectrum analyzer to analyze the frequency range of the audio signal.

(125) The spectral gain of the audio signal was measured using a specialized device.

(126) Intermodulation distortion can introduce unwanted noise into the audio signal.

(127) Overmodulation can result in a loss of detail and clarity in the audio signal.

(128) The demodulator is used in satellite radio systems to recover the audio signal.

(129) Spectral-temporal processing is a fundamental step in audio signal enhancement.

(130) Demodulation is used in digital audio broadcasting to recover the audio signal.

Audio Signal sentence in English

(131) The equalizers can be used to correct any tonal imbalances in the audio signal.

(132) The external circuit is connected to the amplifier to enhance the audio signal.

(133) The preamplifier enhances the audio signal before it reaches the main amplifier.

(134) The audio signal was transmitted through an HDMI cable for both audio and video.

(135) The technician adjusted the amplifier to match the waveform of the audio signal.

(136) The technician adjusted the equalizer to shape the waveform of the audio signal.

(137) A demodulator is used in digital audio broadcasting to recover the audio signal.

(138) The spectrogram revealed a series of short bursts of energy in the audio signal.

(139) The notch filter effectively removes unwanted frequencies from the audio signal.

(140) We need to adjust the phase shift of the audio signal for better synchronization.

(141) The audio signal was transmitted through a coaxial cable for high-fidelity audio.

(142) We used a crossover to separate the audio signal into different frequency ranges.

(143) The preamp's phase control can help correct any phase issues in the audio signal.

(144) The engineer had to modulate away the distortion to achieve a clean audio signal.

(145) The input circuit of the amplifier is responsible for receiving the audio signal.

(146) The audio signal was discretized into digital samples for storage and processing.

(147) Analyzing the spectrogram helped us understand the modulation in the audio signal.

(148) I connected the audio signal from the DVD player to the TV for synchronized sound.

(149) The audio signal was recorded in stereo for a more immersive listening experience.

(150) The waveband analyzer can identify specific frequencies in a complex audio signal.

(151) The spectral purity of the audio signal was improved by using high-quality cables.

(152) The preamplifier is designed to minimize noise and distortion in the audio signal.

(153) The compander unit ensures that the audio signal remains within the desired range.

(154) The amplifier's poor design led to intermodulation distortion in the audio signal.

(155) The electromagnetic interference induced voltage fluctuations in the audio signal.

(156) The input circuit of the speaker system receives the audio signal from the source.

(157) The engineer adjusted the filter to eliminate the sidebands from the audio signal.

(158) The highpass filter effectively removes low-frequency noise from the audio signal.

(159) The technician adjusted the amplifier to reduce the sidelobes in the audio signal.

(160) The audio signal was transmitted through a radio frequency for wireless headphones.

(161) We need to compand the audio signal to make it compatible with the playback device.

(162) We need to compand the audio signal to ensure it meets the required specifications.

(163) The multipath fading mitigation technique improved the quality of the audio signal.

(164) The audio signal was transmitted through a fiber optic cable for high-quality audio.

(165) The preamplifier is equipped with various controls for fine-tuning the audio signal.

(166) The companding process can help to eliminate unwanted artifacts in the audio signal.

(167) The convertors were responsible for converting the audio signal to a digital format.

(168) The audio signal was filtered using a lowpass filter to remove high-frequency noise.

(169) The output stage is where the audio signal is amplified before reaching the speakers.

(170) The audio signal was transmitted through a satellite for long-distance communication.

(171) The engineer designed a filter to eliminate unwanted harmonics from the audio signal.

(172) The underdamped response of the amplifier resulted in distortion of the audio signal.

(173) Spectral-temporal features were extracted from the audio signal for further analysis.

(174) The digital filter can be used to separate different sources in a mixed audio signal.

(175) The preamplifier enhances the weak audio signal before it reaches the main amplifier.

(176) The audio signal was filtered using a low-pass filter to remove high-frequency noise.

(177) It is recommended to compand the audio signal before applying any additional effects.

(178) The companding method is used to prevent clipping and distortion in the audio signal.

(179) The retransmissions of the audio signal were causing distortion in the sound quality.

(180) The spectrum analyzer helped me identify any frequency modulation in the audio signal.

(181) The fanout of the audio signal ensured that all listeners could hear the sound clearly.

(182) The pre-emphasis process is applied before the audio signal is recorded or transmitted.

(183) The spectral density analysis is commonly used in the field of audio signal processing.

(184) Spectral subtraction is a widely studied topic in the field of audio signal processing.

(185) It is important to compand the audio signal before transmitting it over long distances.

(186) The sidechain input on the compressor allows for precise control over the audio signal.

(187) Analyzing the spectrogram helped us understand the spectral content of the audio signal.

(188) The preamplifier allows for precise control over the gain and tone of your audio signal.

(189) The spectrum analyzer allowed me to visualize the harmonics present in the audio signal.

(190) The multiband crossover helped me split my audio signal into different frequency ranges.

(191) We can convolve the audio signal with a noise reduction filter to remove unwanted noise.

(192) The spectral gain of the amplifier was reduced to prevent distortion in the audio signal.

(193) Daisy chaining the amplifiers allowed us to boost the audio signal for a larger audience.

(194) The input circuit of the audio interface processes the audio signal from external devices.

(195) The spectral envelope of the audio signal was analyzed to determine its frequency content.

(196) The sound engineer used a spectrum analyzer to visualize the harmonics in the audio signal.

(197) The coupling capacitor is used to couple the audio signal from the preamp to the power amp.

(198) The sonic delay line is a fundamental building block in audio signal processing algorithms.

(199) Some vocoders allow for the manipulation of individual frequency bands in the audio signal.

(200) The path difference between the two signals caused a phase cancellation in the audio signal.

(201) The field of electroacoustics has led to significant advancements in audio signal processing.

(202) The multiband spectrum analyzer helped me visualize the frequency content of my audio signal.

(203) The presence of Gaussian noise in the audio signal made it difficult to understand the speech.

(204) The intermodulation distortion was caused by the interaction of harmonics in the audio signal.

(205) The self-oscillation of the radio receiver caused interference and static in the audio signal.

(206) The demodulator is an essential part of a wireless microphone system for audio signal recovery.

(207) We can compand the audio signal to fit within the limited dynamic range of the playback device.

(208) The output stage of the power amplifier boosts the audio signal before it reaches the speakers.

(209) The low-pass filter in the headphone amplifier ensures a clean and distortion-free audio signal.

(210) The radio receiver uses demodulators to convert the radio frequency signal into an audio signal.

(211) Without a coupling capacitor, the audio signal would not be able to pass from one stage to another.

(212) The path difference between the two signals caused a delay in the transmission of the audio signal.

(213) The spectrum analyzer provided valuable insights into the frequency distribution of the audio signal.

(214) The voice coil's responsiveness to changes in the audio signal allows for accurate sound reproduction.

(215) The presence of intermodulation distortion can be detected through careful analysis of the audio signal.

(216) The coupling capacitor is responsible for transferring the audio signal from the preamp to the power amp.

(217) The pulse width of a pulse-width modulated signal can be adjusted to control the volume of an audio signal.

(218) Cross-correlating for the presence of a specific waveform is a useful technique in audio signal processing.

(219) The frequency response of the digital signal processor was programmed to enhance the clarity of the audio signal.

(220) The frequency response of the digital audio converter was crucial in maintaining the integrity of the audio signal.

(221) He is always on the lookout for audiophile-approved cables and connectors to ensure the best possible audio signal transmission.

The word usage examples above have been gathered from various sources to reflect current and historical usage of the word Audio Signal. They do not represent the opinions of TranslateEN.com.