Current Gain in a sentence

  • Sentence count: 86
  • Posted:
  • Updated:

Synonym: amplification. Antonym: loss

Meaning: The increase in current resulting from an amplifier or circuit.


Current Gain in a sentence

(1) The current gain of the amplifier is 50.

(2) The current gain of this transistor is 100.

(3) The current gain of this circuit is too low.

(4) The current gain of the amplifier is too low.

(5) The current gain of this amplifier is adjustable.

(6) The current gain of the microphone is adjustable.

(7) The datasheet specifies a minimum current gain of 100.

(8) The current gain of the circuit needs to be increased.

(9) The current gain of the device is measured in decibels.

(10) We need to calculate the current gain of the transistor.



Current Gain sentence

(11) The current gain of this operational amplifier is unity.

(12) Increasing the base current will improve the current gain.

(13) The current gain of the sensor determines its sensitivity.

(14) The current gain of this component is measured in decibels.

(15) The current gain is a crucial parameter in amplifier design.

(16) The current gain of this operational amplifier is adjustable.

(17) The current gain of this device is influenced by temperature.

(18) The current gain of the antenna affects the signal reception.

(19) The current gain of this device is crucial for its performance.

(20) The current gain of the diode affects its forward voltage drop.




Current Gain make sentence

(21) The current gain of this device is affected by the base current.

(22) The current gain of the speaker is too high, causing distortion.

(23) The current gain of the photodiode determines its response time.

(24) The current gain of the transistor is influenced by its biasing.

(25) The current gain of the amplifier can be adjusted using feedback.

(26) The current gain of this transistor is specified in the datasheet.

(27) The current gain of this amplifier can be adjusted using feedback.

(28) The current gain of the circuit can be calculated using Ohm's Law.

(29) The current gain of the transistor can be affected by temperature.

(30) The current gain of this transistor is higher than its predecessor.



Sentence of current gain

(31) The current gain of this transistor is higher in the active region.

(32) The current gain of this circuit can be calculated using Ohm's Law.

(33) The current gain of this system can be measured using a multimeter.

(34) The current gain of the motor needs to be optimized for efficiency.

(35) The current gain of the op-amp determines its amplification factor.

(36) The current gain of this circuit can be measured using a multimeter.

(37) The current gain of this transistor is higher than its voltage gain.

(38) The current gain of this transistor decreases at higher temperatures.

(39) The current gain of this amplifier is sufficient for our application.

(40) The current gain of this transistor is nonlinear at high frequencies.




Current Gain meaningful sentence

(41) The current gain of this component is affected by the load impedance.

(42) The current gain of this transistor is affected by the load impedance.

(43) The current gain of the amplifier can be adjusted using potentiometers.

(44) The current gain of the diode can be influenced by the applied voltage.

(45) The current gain of this transistor is limited by the collector current.

(46) The current gain of this amplifier is influenced by the input impedance.

(47) The current gain of the transistor determines its amplification ability.

(48) The current gain of the speaker system can be adjusted using equalizers.

(49) The current gain of the microphone can be adjusted using a preamplifier.

(50) The current gain of the amplifier can be affected by the load impedance.



Current Gain sentence examples

(51) The current gain of this transistor is influenced by the biasing voltage.

(52) The current gain of this amplifier can be adjusted using a potentiometer.

(53) The current gain of this transistor is affected by the collector current.

(54) The current gain of the antenna can be optimized by adjusting its length.

(55) The current gain of this transistor is higher when operated in saturation.

(56) The current gain of the transistor affects its ability to amplify signals.

(57) The current gain of this component is specified in terms of its hFE value.

(58) The current gain of the power supply affects the stability of the circuit.

(59) The current gain of the circuit can be improved by adding a feedback loop.

(60) The current gain of this transistor is dependent on the biasing conditions.



Sentence with current gain

(61) The current gain of the sensor can be calibrated for accurate measurements.

(62) The current gain of this system can be increased by using a larger resistor.

(63) The current gain of this device is crucial for accurate signal reproduction.

(64) The current gain of this circuit can be improved by using a Darlington pair.

(65) The current gain of the system is directly proportional to the input signal.

(66) The current gain of this system is directly proportional to the input signal.

(67) The current gain of this device is essential for proper signal amplification.

(68) The current gain of the speaker system can be controlled using a volume knob.

(69) The current gain of this transistor is influenced by the base-emitter voltage.

(70) The current gain of this circuit is critical for maintaining signal integrity.




Use current gain in a sentence

(71) The current gain of this circuit can be improved by adding a feedback resistor.

(72) The current gain of this transistor is higher when biased in the active region.

(73) The current gain of this amplifier can be optimized for different applications.

(74) The current gain of this circuit is dependent on the transistor's hFE parameter.

(75) The current gain of the motor can be increased by using a higher voltage supply.

(76) The current gain of this system can be improved by using a higher voltage supply.

(77) The current gain of this circuit is inversely proportional to the input impedance.

(78) The current gain of this circuit is determined by the transistor's characteristics.

(79) The current gain of this circuit can be adjusted by changing the feedback resistor.

(80) The current gain of this component is affected by the frequency of the input signal.



Sentence using current gain

(81) The current gain of this operational amplifier is affected by the power supply voltage.

(82) The current gain of this operational amplifier is specified for a certain frequency range.

(83) Circuit elements can be designed to have specific voltage or current gain characteristics.

(84) The current gain of this transistor is lower than expected due to manufacturing variations.

(85) The current gain of this circuit is affected by the temperature coefficient of the components.

(86) The current gain of this amplifier can be optimized by selecting appropriate feedback components.



Current Gain meaning


Current gain is a term commonly used in electronics and refers to the amplification of an electrical signal in a device such as a transistor or an operational amplifier. It is a crucial parameter that determines the efficiency and performance of these devices. In this article, we will explore various tips on how to use the phrase "current gain" in a sentence effectively.


1. Definition and Context: When using the phrase "current gain" in a sentence, it is essential to provide a clear definition or context to ensure the reader understands its meaning.

For example, you could say, "The current gain, also known as hFE, is a measure of the amplification capability of a transistor."


2. Technical Explanation: To enhance the understanding of the phrase, it can be helpful to provide a technical explanation or description. For instance, you could state, "The current gain of a transistor is the ratio of the output current to the input current when the transistor is in the active region."


3. Comparative Statements: To highlight the significance of current gain, you can make comparative statements. For instance, you could say, "Transistor A has a higher current gain than transistor B, making it more suitable for amplifying weak signals."


4. Real-World Examples: Using real-world examples can make the concept of current gain more relatable.

For example, you could say, "The current gain of a power amplifier determines how effectively it can boost the audio signal from a microphone, resulting in a louder sound output."


5. Application in Circuits: To demonstrate practical usage, you can mention specific circuits or applications where current gain plays a crucial role. For instance, you could state, "In a common-emitter configuration, the current gain of a transistor allows it to amplify small input signals, making it ideal for audio amplification."


6. Importance in Design: Emphasize the importance of considering current gain during the design process.

For example, you could say, "Engineers must carefully select transistors with appropriate current gain values to ensure optimal performance and avoid signal distortion in electronic circuits."


7. Impact on Signal Integrity: Highlight how current gain affects signal integrity and fidelity. For instance, you could state, "A high current gain in an operational amplifier ensures minimal signal distortion, resulting in accurate and faithful reproduction of the input signal."


8. Limitations and Trade-offs: Acknowledge the limitations and trade-offs associated with current gain.

For example, you could say, "While a high current gain is desirable for amplification, it can also introduce noise and reduce stability in certain circuits."


9. Future Developments: Discuss any ongoing research or advancements related to current gain. For instance, you could mention, "Scientists are exploring novel transistor designs to achieve higher current gains and improve the efficiency of electronic devices."


10. Conclusion: Wrap up the article by summarizing the importance of understanding and utilizing current gain effectively in electronic circuits.

For example, you could conclude by saying, "By considering the current gain in circuit design and selecting appropriate components, engineers can ensure optimal performance and achieve desired amplification levels."


In conclusion, the phrase "current gain" is a fundamental concept in electronics, and using it effectively in a sentence requires providing a clear definition, technical explanation, real-world examples, and highlighting its importance in circuit design. By following these tips, you can effectively communicate the significance of current gain and its impact on electronic devices and circuits.





The word usage examples above have been gathered from various sources to reflect current and historical usage of the word Current Gain. They do not represent the opinions of TranslateEN.com.