Drill Bit in a sentence

(1) The drill bit is blunt.

(2) The drill bit was very sharp.

(3) The drill bit is made of metal.

(4) The drill bit rotates clockwise.

(5) The drill bit turns counterclockwise.

(6) The flint out of the drill bit is dull.

(7) The drill bit will spin to make a hole.

(8) The bladed drill bit made a clean hole.

(9) The drill bit rotates in a rotary motion.

(10) The drill bit is rotating anti-clockwise.

Drill Bit sentence

(11) The teeth interlock around the drill bit.

(12) The rotation of a drill bit is clockwise.

(13) The drill bit bellowed through the metal.

(14) The drill bit was turning counterclockwise.

(15) The drill bit bored through the steel block.

(16) The drill bit can pierce up to the concrete.

(17) The drill bit is spinning in the power tool.

(18) The drill bit needs to rotate to bore a hole.

(19) The drill bit wound up through the hard rock.

(20) The drill bit was spinning in the power tool.

Drill Bit make sentence

(21) The drill bit was spinning through the metal.

(22) The drill bit drilled through the steel plate.

(23) The drill bit bored through the steel surface.

(24) He adjusted the bitstock to fit the drill bit.

(25) The drill bit turns clockwise to drill a hole.

(26) The driller carefully positioned the drill bit.

(27) The acerated drill bit made a hole in the wall.

(28) The spinning drill bit made a hole in the wall.

(29) The drill bit was driven deep into the concrete.

(30) The drill bit pierce out with a drilling motion.

Sentence of drill bit

(31) The drill bit can cleave into the hard concrete.

(32) The drill bit was socketed into the power drill.

(33) The drill bit turns counterclockwise to unscrew.

(34) The pinion on the drill bit made it spin faster.

(35) I need to buy a new drill bit for my power drill.

(36) The drill bit hammered through the concrete wall.

(37) The drill bit put a hole through the metal sheet.

(38) The drill bit ran a hole through the metal plate.

(39) The electric drill has different drill bit sizes.

(40) The drill bit broke when the rpm was set too high.

Drill Bit meaningful sentence

(41) The drill bit ran a hole through the wooden plank.

(42) The drill bit slit through easily the metal sheet.

(43) The drill bit torqued over the hard metal surface.

(44) The drill bit rend through into the hard concrete.

(45) He replaced the old drill bit with a brand new one.

(46) The drill bit broke in on the shaft while drilling.

(47) The drill bit perforates the ground to plant seeds.

(48) The drill bit rends through into the metal surface.

(49) The blad of the drill bit made a hole in the metal.

(50) The drill bit has a sharp point for drilling holes.

Drill Bit sentence examples

(51) The drill bit became overheated and started smoking.

(52) The drill bit was able to puncture through the wood.

(53) The drill bit easily shaved through the metal sheet.

(54) The mechanic tightened the collets on the drill bit.

(55) The drill bit ran a hole through the concrete floor.

(56) The drill bit can bore up to 2 inches into concrete.

(57) The drill bit will punch a hole in one swift motion.

(58) The drill bit rotates along its axis to bore a hole.

(59) The drill bit turns counterclockwise to make a hole.

(60) The drill bit turns counterclockwise to bore a hole.

Sentence with drill bit

(61) I need a halfinch drill bit to complete this project.

(62) The drill bit can easily perforate between the tiles.

(63) The drill bit was inserted axially into the material.

(64) The drill bit rotates beneath the force of the drill.

(65) The drill bit turns counterclockwise to drill a hole.

(66) The driller inspects the drill bit for wear and tear.

(67) The drill bit was able to punch through the thick ice.

(68) He used a larger drill bit to widen the existing hole.

(69) The drill bit is designed to perforate metal surfaces.

(70) The drill bit perforates the metal sheet effortlessly.

Use drill bit in a sentence

(71) The drill bit bevels through the metal with precision.

(72) The drill bit was able to sheer through the hard rock.

(73) The diamond drill bit put a hole through the gemstone.

(74) The mucro of the drill bit easily penetrated the wood.

(75) I need a half-inch drill bit to complete this project.

(76) The drill bit can bore up to 4 inches into solid rock.

(77) The drill bit was too big to bore a hole in the metal.

(78) The carpenter needed a halfinch drill bit for the job.

(79) The drill bit rotates counterclockwise to bore a hole.

(80) The torque on the drill bit created a hole in the wall.

Sentence using drill bit

(81) The drill bit was designed to punch through solid rock.

(82) The drill bit broke while I was drilling into the wall.

(83) The drill bit was too short to reach the desired depth.

(84) The drill bit is sharp enough to easily perforate wood.

(85) The pneumatic drill will pressurize into the drill bit.

(86) The drill bit effortlessly penetrated the wooden plank.

(87) The countersinks on this drill bit are not sharp enough.

(88) I need a quarterinch drill bit to complete this project.

(89) The drill bit rotated anticlockwise to loosen the screw.

(90) The drill bit circumrotates to bore a hole in a surface.

Drill Bit example sentence

(91) The pinion is used to adjust the angle of the drill bit.

(92) The drill bit was able to pierce through the metal sheet.

(93) The toolroom is where I go to replace a broken drill bit.

(94) The drill bit can rotate at 2,500 revolutions per minute.

(95) The drill bit rotated anticlockwise to loosen the screws.

(96) The drill bit turns anticlockwise to make a hole in wood.

(97) The drill bit went through to the other side of the wall.

(98) The drill bit is blunt and won't make a hole in the wall.

(99) The drill bit was able to blast through the frozen ground.

(100) The revolutions of the drill bit create holes in the wall.

Sentence with word drill bit

(101) The drill bit got stuck in the wood and wouldn't come out.

(102) She applied lubricant to the drill bit to reduce friction.

(103) She accidentally drilled too deep and broke the drill bit.

(104) The axialities of the drill bit were causing it to wobble.

(105) The drill bit was specifically designed for counterboring.

(106) The drill bit was helically shaped for efficient drilling.

(107) The untoothed drill bit couldn't make a hole in the metal.

(108) The drill bit turned counterclockwise to loosen the screw.

(109) I bought a special drill bit for drilling through concrete.

(110) The main shaft of the drill bit was made of hardened steel.

Sentence of drill bit

(111) He cleaned the drill bit after each use to prevent rusting.

(112) The drill bit got jammed in the chuck and wouldn't release.

(113) The drill bit was able to puncture through the metal plate.

(114) The drill bit was able to carve through the solid concrete.

(115) The drill bit was able to perforate through the brick wall.

(116) The drill bit started to perforate outside the marked spot.

(117) The drill bit went too far and perforated outside the wall.

(118) The drill bit was able to undercut through the metal plate.

(119) He carefully selected the appropriate drill bit for the job.

(120) The drill bit created a clean and precise hole in the metal.

Drill Bit used in a sentence

(121) The stellite coating on the drill bit prolongs its lifespan.

(122) The drill bit was able to pulverize through the metal sheet.

(123) The unpointed drill bit was not suitable for drilling holes.

(124) The countersunk slots on the drill bit ensured a proper fit.

(125) The drill bit was able to perforate through the metal sheet.

(126) The drill bit was able to sharpen through the metal surface.

(127) The drill bit was able to pierce into the wood effortlessly.

(128) The drill bit left a circular gouge in on the metal surface.

(129) The drill bit hit a hard layer of shale underneath the soil.

(130) The cermet coating on the drill bit improves its durability.

Drill Bit sentence in English

(131) You need to use the correct size drill bit to make the hole.

(132) The drill bit slipped and scratched the surface of the metal.

(133) The drill bit slipped out of his hand and fell to the ground.

(134) I accidentally broke one of the countersinks on my drill bit.

(135) The countersinks on this drill bit are not centered properly.

(136) The rotatory motion of the drill bit helps in drilling holes.

(137) Hafting a drill bit onto a drill allows for precise drilling.

(138) The drill bit broke and perforated outside the drilling area.

(139) The drill bit was not sharp enough to dull through the metal.

(140) The torque of the drill bit easily drilled through the metal.

(141) The drill bit was able to gouge apart the layers of sediment.

(142) The drill bit was able to gouge up to the layers of sediment.

(143) The machinist countersank the drill bit into the metal plate.

(144) The drill bit turns anticlockwise to make a hole in the wall.

(145) The drill bit began to spin down towards the end of the hole.

(146) The drill bit acted as a penetrator, boring through the rock.

(147) The drill bit corkscrewed into the ground, searching for oil.

(148) The drill bit has a sharp tip that can make holes in objects.

(149) The drilling mud is used to lubricate and cool the drill bit.

(150) The axis of a drill bit determines the direction of the hole.

(151) The drilling mud is used to cool and lubricate the drill bit.

(152) She sharpened the drill bit to ensure clean and precise holes.

(153) The drill bit chipped when it hit a hard spot in the concrete.

(154) The drill bit rotates anticlockwise to bore into the material.

(155) The drill bit was circumrotating to create a hole in the wall.

(156) The torque on the drill bit allowed it to create a clean hole.

(157) The drill bit was able to shoot a hole through the solid rock.

(158) The stellite coating on the drill bit enhances its durability.

(159) The carpenter needed a quarterinch drill bit to make the hole.

(160) The drill bit should rotate anticlockwise to remove the screw.

(161) The collets on the drill bit securely held the screw in place.

(162) The oil rig was derricking the drill bit into the ocean floor.

(163) I accidentally broke the drill bit while using the drill press.

(164) The pistons in the drill powered the rotation of the drill bit.

(165) I accidentally chipped one of the countersinks on my drill bit.

(166) The drill bit was able to skew through the tough metal surface.

(167) The drill bit rotates forward to create a hole in the material.

(168) The twist drill bit is made of high-speed steel for durability.

(169) The machinist reground the drill bit to make it more efficient.

(170) The drill bit can bisect through to the other side of the wall.

(171) The drill bit was driven deep into the wall to install a shelf.

(172) The drill bit broke while he was making holes to hang the door.

(173) The drill bit rotates rotationally to bore a hole in a surface.

(174) The drill bit turns anticlockwise to create a hole in the wall.

(175) The drill bit went plumb through to the other side of the wall.

(176) The drill bit punctured down into the metal and created a hole.

(177) The axis of the drill bit determines the direction of the hole.

(178) The twist drill bit can be easily replaced when it becomes dull.

(179) She carefully measured the depth before inserting the drill bit.

(180) I accidentally stripped one of the countersinks on my drill bit.

(181) He calipered the size of the drill bit before drilling the hole.

(182) The drill bit got stuck in the shale between the oil reservoirs.

(183) The drill bit was designed to maw through even the hardest rock.

(184) She callipered the diameter of the hole for the right drill bit.

(185) The knurling on the drill bit improves its stability during use.

(186) The drill bit easily penetrated the wood without any resistance.

(187) The flathead drill bit is used for creating flat-bottomed holes.

(188) The twist drill bit should be handled with care to avoid injury.

(189) The drill bit was used to gravel away the rock for the oil well.

(190) The drill bit was able to abrade through to the hard rock layer.

(191) The drill bit became burred after hitting a hard piece of metal.

(192) The torque on the drill bit was too weak to penetrate the metal.

(193) The drill bit turns counterclockwise to make a hole in the wall.

(194) The drill bit turns counterclockwise to bore a hole in the wall.

(195) The blad of the drill bit effortlessly drilled through the metal.

(196) The drill bit was specifically designed to bore through concrete.

(197) The socketed drill bit made drilling through the wall effortless.

(198) I need to clean the debris from the countersinks on my drill bit.

(199) The shaftless drill bit was perfect for drilling in tight spaces.

(200) The drill bit started to penetrate toward the center of the wood.

(201) The drill bit was designed to perforate across various materials.

(202) The drill bit needs to rotate forward to drill into the material.

(203) The drill bit turns anticlockwise to bore a hole in the material.

(204) The drill bit should be turned counterclockwise to loosen screws.

(205) The drill bit turned counterclockwise to bore a hole in the wall.

(206) I always double-check the drill bit size before using my bitstock.

(207) The drill bit was too dull to effectively cut through the plastic.

(208) The mechanic used a drill bit to punch a hole in the car's engine.

(209) The ratcheting of the drill bit ensured a secure hole in the wall.

(210) The carborundum coating on the drill bit increased its durability.

(211) The drill bit spins in a rotary motion, drilling into the surface.

(212) The drill bit was strong enough to perforate from the metal sheet.

(213) The bushing on the drill bit helps to reduce vibration during use.

(214) The drill press needs you to feed onto the drill bit with caution.

(215) The mechanic used an up cut drill bit to make a hole in the metal.

(216) The rotaries on the drill bit made it easy to create precise holes.

(217) The carbide drill bit is ideal for drilling through hardened steel.

(218) The drill bit was too dull to effectively cut through the material.

(219) The ejes of a drill bit allow it to rotate and penetrate materials.

(220) Position the drill bit bevel up from the workpiece before drilling.

(221) Truing the drill bit will prevent it from wandering while drilling.

(222) The oil ring on the drill bit helps lubricate the drilling process.

(223) The rotatory motion of the drill bit makes it easier to bore holes.

(224) The nonrotating drill bit was unable to penetrate the hard surface.

(225) The drill bit went laterally through to the other side of the wall.

(226) The drill bit ground against the hard rock, slowly making progress.

(227) The pinion on the drill bit helped it bore through tough materials.

(228) He carefully aligned the drill bit with the marked spot on the wood.

(229) The drill bit was securely fastened in the chuck for safe operation.

(230) The taper on the drill bit allowed for a smooth entry into the wood.

(231) The pneumatical drill bit effortlessly drilled through the concrete.

(232) The intense friction caused the drill bit to smelt through the wood.

(233) Ensure the drill bit is bevel up from the workpiece before drilling.

(234) The drill bit was able to easily perforate inside the concrete wall.

(235) The woodworker used a downcut drill bit to create holes in the wood.

(236) The drill bit was too small to dull through the thick concrete wall.

(237) The drill bit puncture through the wood, creating a hole for screws.

(238) The main spindle of the drill press holds and rotates the drill bit.

(239) The reciprocating motion of the drill bit creates holes in the wall.

(240) The torque on the drill bit allowed it to penetrate the wood easily.

(241) The drill bit tawed into the plastic, creating a hole for the screw.

(242) He used the caliper to slide the drill bit over slowly and steadily.

(243) The angular-velocity of the drill bit determined its drilling speed.

(244) The axes-of-rotation of a drill bit determine its cutting direction.

(245) The carpenter used a drill bit to predrill the holes for the dowels.

(246) The rotative speed of the drill bit was too slow for the hard metal.

(247) The self-tapping drill bit allowed for quick and efficient drilling.

(248) The drill bit remained unblunted after drilling through thick metal.

(249) The intense pressure caused the drill bit to burn through the metal.

(250) I had to replace the boring tool's drill bit, but it was easy to do.

(251) The electric drill has an insertable drill bit for various materials.

(252) The abradable coating on the drill bit enhances drilling performance.

(253) The torque from the drill bit made drilling through metal effortless.

(254) The drill bit was sharp enough to penetrate inside the metal surface.

(255) The drill bit was designed to penetrate under the toughest materials.

(256) The mechanic used a drill bit to perforate beneath the car's chassis.

(257) The twist drill bit can be used with both corded and cordless drills.

(258) The drill bit was able to punch through the metal sheet effortlessly.

(259) The rotators on the drill bit helped to bore through tough materials.

(260) The drill bit was able to run a hole through the thick concrete wall.

(261) The drill bit and chuck are mounted coaxially for precision drilling.

(262) It's a good idea to sheathe your drill bit to avoid injury or damage.

(263) The drill bit broke because it was torque out at too high of a speed.

(264) I always spin down the drill bit before removing it from the material.

(265) She wore safety goggles while using the drill bit to protect her eyes.

(266) The drill bit was specifically designed for drilling through concrete.

(267) The drill bit is specifically designed to perforate concrete surfaces.

(268) The cylindricity of a drill bit affects the accuracy of drilled holes.

(269) The drill bit should be turned in a clockwise rotation to bore a hole.

(270) The drill bit rotates in a rotary motion to bore through the material.

(271) The drill bit was specifically designed to countersink holes in metal.

(272) He used the caliper to move the drill bit forward slowly and steadily.

(273) He used the caliper to move the drill bit through slowly and steadily.

(274) He used the caliper to push the drill bit towards slowly and steadily.

(275) The drill bit is not drilling properly, so it needs to be resharpened.

(276) The tailstock can be used to hold a drill bit for drilling operations.

(277) The drill bit was able to pulverise the hard rock around the oil well.

(278) The drill bit was thrust through to the other side of the metal plate.

(279) The fillister drill bit was used to create a pilot hole for the screw.

(280) The tungs in the drill bit need to be replaced for better performance.

(281) The torque through the drill bit made it easy to bore through the wood.

(282) The torque in the drill bit helped me create precise holes in the wood.

(283) She accidentally drilled at an angle and the drill bit went off course.

(284) Position the drill bit bevel up from the workpiece to prevent tear-out.

(285) The drill bit was designed to perforate through the toughest materials.

(286) The drill bit was able to maw through the brick wall and create a hole.

(287) The handwheel on the drill press controlled the speed of the drill bit.

(288) As the drill bit hit the rock, it started to shale into smaller pieces.

(289) The stellite coating on the drill bit prevents it from dulling quickly.

(290) The detents on the drill bit prevented it from slipping while drilling.

(291) The blunting of the drill bit made it hard to make a hole in the metal.

(292) He tightened the thumbnut on the drill bit to prevent it from slipping.

(293) The carbide drill bit effortlessly penetrates through concrete surfaces.

(294) He used a diamond-tipped drill bit for drilling into the porcelain tile.

(295) The drill bit was able to perforate through and through the metal sheet.

(296) The drill bit punctured through the wood, creating a hole for the screw.

(297) The drill bit rotated anticlockwise, creating a hole in the metal sheet.

(298) The drill bit will perforate beneath the concrete to install the anchor.

(299) The mechanic used a downcut drill bit to make a hole in the metal sheet.

(300) The new drill bit was called the penetrator for its ability to dig deep.

(301) The machinist had to rod out the drill bit to remove the metal shavings.

(302) The torque over the drill bit made drilling through the metal effortless.

(303) The main shaft of the drill bit was securely fastened to the drill press.

(304) She accidentally dropped the drill bit and it rolled under the workbench.

(305) The drill bit needs to rotate on high speed to create a hole in the wall.

(306) The drillability of the rock was tested using a diamond-tipped drill bit.

(307) The drill bit was able to perforate through and through the ceramic tile.

(308) The whipstock is designed to guide the drill bit in a specific direction.

(309) The gear train in the power drill controls the rotation of the drill bit.

(310) The main shaft of the power drill spins the drill bit for drilling holes.

(311) He rummaged through his tool bag, searching for the right size drill bit.

(312) The twist drill bit can be used with hand drills as well as power drills.

(313) The drill bit pierced down into the metal, creating a hole for the screw.

(314) The drill bit was resharpened to make it drill through metal more easily.

(315) The drill bit halved through into the metal, making a hole for the screw.

(316) The drill bit was too small for the counterbore needed for the bolt head.

(317) The drill operator carefully positioned the drill bit over the drillhole.

(318) The oil will oil up through the drill bit to keep it cool while drilling.

(319) The torque on the drill bit allowed it to bore through the tough material.

(320) The carpenter used a countersunk drill bit to create holes for the screws.

(321) The technician guided the drill bit through the shaft down into the earth.

(322) The cannulated drill bit was used to create a hole in the patient's skull.

(323) She used a self-tapping drill bit to create holes in the plastic material.

(324) The drill bit pierced down into the plastic, creating a hole for the wire.

(325) The toothing on the drill bit allows for easy insertion into the material.

(326) The drill bit was able to perforate across the concrete wall effortlessly.

(327) The drill bit can be rotated rotatably to bore through different materials.

(328) The engineer designed a new drill bit to make the drillhole more efficient.

(329) The whipstock is a tool used in drilling operations to guide the drill bit.

(330) The drill bit easily penetrated without resistance through the wooden board.

(331) The machinist calibrated the torque onto the drill bit for precise drilling.

(332) The pinion out from the drill bit caused it to become stuck in the material.

(333) The knurled grip on the drill bit allowed for better control while drilling.

(334) The twist drill bit has flutes that help in chip evacuation during drilling.

(335) The drill bit went through to the plate, creating a perfectly centered hole.

(336) The drill bit was used to gravel over the rough edges of the newly-dug well.

(337) The counterbore is typically created using a drill bit with a special shape.

(338) The polycrystalline diamond coating on the drill bit increased its lifespan.

(339) The drill bit lanced through the concrete, creating a hole for construction.

(340) The drill bit was sharp enough to slap through to the other side of the wood.

(341) Ensure the drill bit is positioned bevel up from the surface before drilling.

(342) The construction worker's drill bit sheared off while drilling into concrete.

(343) The electromagnetic field is used in electric drills to rotate the drill bit.

(344) The stellite-tipped drill bit effortlessly penetrates through hard materials.

(345) The drill bit was able to gouge up to the layers of rock beneath the surface.

(346) The mucro of the drill bit was designed for drilling through tough materials.

(347) The drill bit cracked through into the oil reservoir deep beneath the ground.

(348) The morticing bit is a specialized drill bit used to create mortises in wood.

(349) The oil rig's drill bit was lowered down the shaft to reach the oil reserves.

(350) He used a smaller drill bit to create pilot holes before drilling larger ones.

(351) The drill bit got stuck in the metal and required significant force to remove.

(352) The diamond-tipped drill bit was able to bore through the reinforced concrete.

(353) The gears in a power drill help control the speed and torque of the drill bit.

(354) The drill bit was able to penetrate without difficulty through the metal plate.

(355) The downhole motor was used to rotate the drill bit during drilling operations.

(356) The feed mechanism of the power drill advances the drill bit into the material.

(357) I accidentally broke the twist drill bit while drilling into the concrete wall.

(358) The twist drill bit should be securely tightened in the drill chuck before use.

(359) The carpenter used a drill bit for predrilling pilot holes in the wooden plank.

(360) The carpenter used a rightangled drill bit to create a hole at a perfect angle.

(361) The armatures of the electric drills are responsible for rotating the drill bit.

(362) The user manual provides instructions on how to lubricate through the drill bit.

(363) The intense friction caused the drill bit to smelt through the concrete surface.

(364) The cylindricality of the drill bit allows for precise drilling in tight spaces.

(365) The twist drill bit should be periodically lubricated to ensure smooth drilling.

(366) The drill bit will crush into gypsum to create a hole for the electrical wiring.

(367) The drill bit was designed to perforate between the tiles without damaging them.

(368) The toolholder securely held the drill bit in place during the drilling process.

(369) The machinist adjusted the collet on the lathe to fit the size of the drill bit.

(370) The RPM of the drill bit was too high, causing it to break through the material.

(371) The torque within a drill bit determines how easily it can penetrate a material.

(372) The torque within the drill bit allowed it to effortlessly bore through the wood.

(373) The drill bit was able to clipper through the metal plate without any difficulty.

(374) The pitch diameter of a drill bit determines the size of the hole it will create.

(375) The carpenter used a countersunk drill bit to create a recess for the screw head.

(376) The drill bit was juddering as it struggled to penetrate the tough metal surface.

(377) The drilling mud was pumped into the wellbore to cool and lubricate the drill bit.

(378) The drill bit needs to rotate on low speed to tighten the screws in the furniture.

(379) The drilling mud helps to cool down the drill bit and prevent it from overheating.

(380) The twist drill bit has a sharp point that helps it penetrate the material easily.

(381) The drill bit tawed into the wall, making way for the installation of a new shelf.

(382) The bladiest drill bit in the construction site was used to bore through concrete.

(383) The nutating motion of the drill bit allowed for precise drilling in tight spaces.

(384) Before drilling any holes, use a caliper to measure the diameter of the drill bit.

(385) The torque under a drill bit affects its ability to drill through tough materials.

(386) The torque in the drill bit helped me create accurate and clean holes in the metal.

(387) The drill bit set includes various sizes of countersinks for different screw sizes.

(388) The self-tapping feature of the drill bit allowed for quick and efficient drilling.

(389) When using power tools, be sure to keep your calf away from the blade or drill bit.

(390) The self-tapping feature of the drill bit allowed for precise and accurate drilling.

(391) The drillability of the granite bedrock was tested using a diamond-tipped drill bit.

(392) The torsive motion of the drill bit allowed it to easily penetrate the hard surface.

(393) The reciprocating motion of the drill bit allows for drilling into various materials.

(394) The drill bit was designed to penetrate without difficulty through the concrete wall.

(395) The torque around action of the drill bit allowed it to penetrate the surface easily.

(396) The drill bit was specifically designed to penetrate fibrous barriers in woodworking.

(397) The drill bit was turning clockwise, but the screw needed to be rolled anticlockwise.

(398) The helicoid shape of the drill bit allowed for efficient drilling in tough materials.

(399) The machinist adjusted the concentricity of the drill bit to ensure accurate drilling.

(400) The trochoidal motion of the drill bit created a smooth and precise hole in the metal.

(401) The construction worker used a calcify round drill bit to create holes in the concrete.

(402) The helical design of a drill bit allows for efficient drilling into various materials.

(403) The engineer designed a drill bit that can perforate between different types of metals.

(404) The drilling mud helped to lubricate the drill bit and reduce friction during drilling.

(405) The drill bit could shear off if it's not strong enough for the material being drilled.

(406) The lab assistant adjusted the torque against the drill bit to prevent it from breaking.

(407) The mechanical strength of the drill bit allowed it to penetrate through tough materials.

(408) The critical speed of a drill bit affects its ability to cut through different materials.

(409) The transmission mechanism in a power drill transfers rotational motion to the drill bit.

(410) The carpenter used a chamfered drill bit to create countersunk holes in the wooden plank.

(411) The machinist adjusted the concentricity of the drill bit to avoid damaging the material.

(412) The outer race of the drill chuck was adjustable to accommodate different drill bit sizes.

(413) The machinist used a chamfering drill bit to create a countersink hole in the metal plate.

(414) I need to replace the chuck on my drill press as it's not gripping the drill bit properly.

(415) The scree of the drill bit against the wall indicated progress in the construction project.

(416) The diamond-tipped drill bit was able to penetrate without difficulty through the gemstone.

(417) Contraclockwise rotation of the drill bit allows for efficient drilling into hard surfaces.

(418) The drill bit was able to penetrate below the concrete surface to install a new fence post.

(419) The handwheels on the drill press were used to adjust the speed and depth of the drill bit.

(420) The drill bit was specifically designed to penetrate fibrous barriers in construction sites.

(421) The drill bit was able to penetrate inside the concrete wall and create a hole for mounting.

(422) The drill bit was designed to perforate beside the existing hole, creating a larger opening.

(423) The mechanic tightened the collet on the drill press to prevent the drill bit from slipping.

(424) The rough surface of the metal abrades across the drill bit, causing it to wear down quickly.

(425) The drill press has a quill lock feature that keeps the drill bit in place during adjustments.

(426) The drill bit sizzled through to the other side of the wood, creating a perfectly aligned hole.

(427) The penetrations of the drill bit were precise and accurate, creating clean holes in the metal.

(428) The helicoid structure of the drill bit allowed for efficient drilling through various materials.

(429) The drillability of the ground was improved by using a drilling fluid to lubricate the drill bit.

(430) The addition of bentonite to drilling fluids helps to control pressure and lubricate the drill bit.

(431) He used a small drill bit to create a pilot hole around the staple and then eased it out of the surface.

(432) The drill bit was designed to penetrate fibrous barriers in order to access oil reserves deep underground.

(433) The diamond-tipped drill bit demonstrated its superior penetrating power by effortlessly drilling through solid rock.

(434) The mechanic recommended using a drill bit made of high-speed steel to drill through the nickel up through the steel plate.

The word usage examples above have been gathered from various sources to reflect current and historical usage of the word Drill Bit. They do not represent the opinions of TranslateEN.com.