Electrical Current in a sentence

  • Sentence count: 259
  • Posted:
  • Updated:


Electrical Current in a sentence

(1) Abamperes are a unit of electrical current.

(2) The electrical current ran through the motor.

(3) Electrical current is measured using an ammeter.

(4) The electrical current in the circuit is too high.

(5) Abamps are a unit of electrical current measurement.

(6) The movement of electrons creates electrical current.

(7) The electrical current depolarizes the cell membrane.

(8) The pylon stood erect through the electrical current.

(9) The fuse can light on fire with an electrical current.

(10) Electrical current can be either direct or alternating.



Electrical Current sentence

(11) Electrical current is used to power electronic devices.

(12) A circuit must be closed for electrical current to flow.

(13) The neutralized electrical current was safe to work with.

(14) The photodiode converts light into an electrical current.

(15) The electrical current will depolarize the cell membrane.

(16) A battery emits energy in the form of electrical current.

(17) The microvolt reading indicated a weak electrical current.

(18) The motor's brushes help commutate the electrical current.

(19) The solenoid can actuate by applying an electrical current.

(20) The electrician will warn you about the electrical current.




Electrical Current make sentence

(21) The microvolt reading indicated a strong electrical current.

(22) The electrical current caused the atoms to unravel into ions.

(23) The milliammeter measures electrical current in milliamperes.

(24) The strength of electrical current can be measured in amperes.

(25) Remember to flip the watt on to enable the electrical current.

(26) The electrical current caused the cell membrane to depolarize.

(27) The electrical current running through the wires is dangerous.

(28) The flow of electrical current powers our homes and businesses.

(29) Electrical current is measured in units of coulombs per second.

(30) Electrical current is the foundation of electrical engineering.



Sentence of electrical current

(31) The electrical current running through the circuit is too high.

(32) The flow of electrical current can be controlled using switches.

(33) The electrical current caused the cell to hyperpolarize rapidly.

(34) The newtons of electrical current powered the electronic device.

(35) The electrical current causes the compound to unravel into ions.

(36) The oscillograph recorded the changes in the electrical current.

(37) The galvanoscope allowed us to visualize the electrical current.

(38) The deflexions in the electrical current caused a short circuit.

(39) The electrical current can be dangerous if not handled properly.

(40) I need to commutate the electrical current to prevent any damage.




Electrical Current meaningful sentence

(41) Multimeters are essential tools for measuring electrical current.

(42) The taser's electrical current caused temporary muscle paralysis.

(43) The flow of electrical current can be controlled using resistors.

(44) The iontophoretic process involves the use of electrical current.

(45) The wires interlock under the pressure of the electrical current.

(46) The engineer installed shunts to regulate the electrical current.

(47) The electrodynamic ammeter is used to measure electrical current.

(48) Boosting the voltage will result in a stronger electrical current.

(49) The process of electrolyzing water requires an electrical current.

(50) The purpose of diodes is to control the flow of electrical current.



Electrical Current sentence examples

(51) The flow of electrical current can be disrupted by a short circuit.

(52) The third rail of the subway system carries the electrical current.

(53) The resistive material had a high resistance to electrical current.

(54) The coulometric sensor detected a change in the electrical current.

(55) The electrocautery device emits a high-frequency electrical current.

(56) The amphometer provides accurate measurements of electrical current.

(57) The iontophoretic process involves the use of an electrical current.

(58) The arc lamp's electrical current created a continuous arc of light.

(59) A current amplifier increases the strength of an electrical current.

(60) Electrical current is essential for the operation of electric motors.



Sentence with electrical current

(61) The attenuation of the electrical current resulted in a power outage.

(62) The resistive material had a low conductivity for electrical current.

(63) The electrodynamometer is sensitive to changes in electrical current.

(64) Electrical current is the result of the movement of charged particles.

(65) The oscillograph captured the rapid changes in the electrical current.

(66) The spot welding process requires a high amount of electrical current.

(67) The iontophoretic technique uses electrical current to transport ions.

(68) The rheostat is a versatile device for controlling electrical current.

(69) The ground plane provides a low impedance path for electrical current.

(70) Electrical current is essential for the operation of lighting fixtures.




Use electrical current in a sentence

(71) The electrical current passing through the wire is converted into heat.

(72) The electrical current was measured in milliamperes using a multimeter.

(73) The converter reconverts the electrical current to a different voltage.

(74) The electrical current flowing through the wire is converted into heat.

(75) The analog device provides a precise measurement of electrical current.

(76) Without a closed circuit, the electrical current cannot power a device.

(77) The electrical current will always follow the path of least resistance.

(78) The electrical current flowing through the wires powers the light bulb.

(79) Superconducting materials can carry large amounts of electrical current.

(80) The flow of electrical current can be visualized using circuit diagrams.



Sentence using electrical current

(81) The brazed joint provided excellent conductivity for electrical current.

(82) The spot welder uses electrical current to join metal surfaces together.

(83) The electrical current flowing through the wire is measured in milliamps.

(84) High-voltage electrical current can be dangerous if not handled properly.

(85) The direction of electrical current is opposite to the flow of electrons.

(86) The dynamotor's commutator ensures the proper flow of electrical current.

(87) The strength of an electrical current can fluctuate through power surges.

(88) In a closed circuit, the electrical current follows a predetermined path.

(89) The objective measurement of electrical current is done using an ammeter.

(90) The rheostat is a simple yet effective way to control electrical current.



Electrical Current example sentence

(91) The intense electrical current causes the wire to unravel into molecules.

(92) Without a loop circuit, the electrical current would not be able to flow.

(93) Objective measurement of electrical current is achieved using an ammeter.

(94) The return circuit completes the path for the electrical current to flow.

(95) The electrical transformer changes the voltage of the electrical current.

(96) The transformer is used to amplify the voltage of the electrical current.

(97) Electrical current is the movement of electric charge through a conductor.

(98) The commutator is designed to withstand high levels of electrical current.

(99) Without a closed circuit, the electrical current cannot complete its path.

(100) The distributor cap distributes the electrical current to the spark plugs.



Sentence with word electrical current

(101) The transmission path of the electrical current is through the power lines.

(102) Transistors are responsible for controlling the flow of electrical current.

(103) The galvanometric measurement indicated a high level of electrical current.

(104) The earth connection provides a path for excess electrical current to flow.

(105) The millivolt reading on the voltmeter indicated a weak electrical current.

(106) Make sure to activate the electrode before applying any electrical current.

(107) The loop circuit ensures that the electrical current returns to its source.

(108) The electrometric device detected a small electrical current in the circuit.

(109) The resistive coating on the wire prevented electrical current from flowing.

(110) The axialities of a circuit diagram indicate the flow of electrical current.



Sentence of electrical current

(111) The creepage between the two surfaces caused the electrical current to leak.

(112) Nonconductors are materials that have high resistance to electrical current.

(113) The electrician used a circuit breaker to neutralize the electrical current.

(114) The bifurcated wire split the electrical current into two different circuits.

(115) Electrical current is the basis for the functioning of electrical appliances.

(116) Electrical current is used to power heating and cooling systems in buildings.

(117) The ground electrode is designed to handle high levels of electrical current.

(118) If argyrodite is subjected to electrical current, it may conduct electricity.

(119) Overvoltages can occur when there is a sudden increase in electrical current.

(120) The earthed conductor was used to provide a safe path for electrical current.



Electrical Current used in a sentence

(121) The reversed polarity of the electrical current caused the device to overheat.

(122) The amplitude of the electrical current determined the strength of the signal.

(123) The magnetizable material can be magnetized to generate an electrical current.

(124) The power transformer is designed to handle high levels of electrical current.

(125) The demagnetizing effect of the electrical current weakens the magnetic field.

(126) The return circuit ensures that the electrical current flows in a closed loop.

(127) The overloaded circuit breaker was overladen with too much electrical current.

(128) Circuit-breakers are designed to handle different levels of electrical current.

(129) The distributor cap helps distribute the electrical current to the spark plugs.

(130) The flow of electrical current can be interrupted by a fuse or circuit breaker.



Electrical Current sentence in English

(131) The loop circuit is designed to handle a specific amount of electrical current.

(132) Diodes are used in photodiodes to convert light energy into electrical current.

(133) The dielectrically insulated material prevented the flow of electrical current.

(134) The transmission path of the electrical current was disrupted by a faulty wire.

(135) The electrician discharged the electrical current before repairing the circuit.

(136) If the electrical current is too high, it can damage the electronic components.

(137) The electrical current flowing through the circuit was measured in kiloamperes.

(138) The linear scale on the multimeter displayed the electrical current in amperes.

(139) The voltage converter is used to amplify the voltage of the electrical current.

(140) The scientist carefully activated the electrode to start the electrical current.

(141) The radioactively charged particles were responsible for the electrical current.

(142) The electrical current was too strong, so we had to install a voltage regulator.

(143) The cross-sectional area of a wire affects its heating due to electrical current.

(144) Electrical current is used to transmit information in telecommunications systems.

(145) The slip ring is commonly used in electric motors to transfer electrical current.

(146) The transmission path of the electrical current was damaged due to a faulty wire.

(147) The busbar is made of copper or aluminum and is used to carry electrical current.

(148) The electrical grounding rod provides a safe path for electrical current to flow.

(149) The electrician used the gauges to measure the voltage of the electrical current.

(150) The earth connection provides a path for excess electrical current to flow safely.

(151) Galvanisms are a type of electrical current that can be used for various purposes.

(152) The electrical current flowing through a circuit can be measured using an ammeter.

(153) The step-up transformer is designed to withstand high levels of electrical current.

(154) The flow of electrical current can be affected by the temperature of the conductor.

(155) The electrician used a multimeter to catch a spark and test the electrical current.

(156) The electrician used a metal rod round to test the electrical current in the wires.

(157) The engineer's design isolates the electrical current beyond any potential hazards.

(158) The frequency of the electrical current determines the number of cycles per second.

(159) Electrotomy is a surgical procedure that uses electrical current to make incisions.

(160) The dielectrically isolated circuit prevented any unwanted electrical current flow.

(161) The convertors were essential in transforming the electrical current from AC to DC.

(162) The electroforming process requires a conductive solution and an electrical current.

(163) The amount of electrical current in a circuit depends on the voltage and resistance.

(164) Electrical current is generated by power plants and distributed through power lines.

(165) The amplitude of the electrical current determined the brightness of the light bulb.

(166) Impedance is a term that describes the opposition to the flow of electrical current.

(167) The electrician used the wiring diagram to trace the path of the electrical current.

(168) Photodiodes are semiconductor devices used to convert light into electrical current.

(169) The ground electrode provides a path for electrical current to flow into the ground.

(170) The loop circuit is designed to prevent any interruptions in the electrical current.

(171) The pulse amplitude of the electrical current determined the strength of the signal.

(172) The technician carefully activated the electrode to initiate the electrical current.

(173) Photoelectrons can be used to generate an electrical current in a photovoltaic cell.

(174) The battery terminal is where the electrical current flows in and out of the battery.

(175) The convertor is a device used to change electrical current from one form to another.

(176) The electrician will calibrate the multimeter by means of a known electrical current.

(177) The strength of electrical current can be increased by connecting batteries in series.

(178) The engineer designed a system to invert the electrical current for better efficiency.

(179) The ground cable is responsible for diverting excess electrical current to the ground.

(180) A power divider is essential for splitting the electrical current between two devices.

(181) The return circuit ensures that the electrical current flows smoothly and efficiently.

(182) The ground cable provides a path for electrical current to flow safely into the ground.

(183) The saturability of a material determines its maximum resistance to electrical current.

(184) Without a closed circuit, the electrical current would dissipate into the surroundings.

(185) The commutating inductance is crucial for proper commutation of the electrical current.

(186) The battery can absorb the energy of the electrical current and store it for later use.

(187) The busbar is designed to handle high levels of electrical current without overheating.

(188) The electrosurgical pencil is a handheld device used to deliver the electrical current.

(189) The fanout of the electrical current ensured that all devices received sufficient power.

(190) The dielectrically coated surface prevented any electrical current from passing through.

(191) The ultrahigh voltage of the electrical current posed a danger to anyone who touched it.

(192) Surface mount diodes are used to control the flow of electrical current in one direction.

(193) Understanding the principles of electrical current is essential for electrical engineers.

(194) The circuit breaker switch is designed to handle a specific amount of electrical current.

(195) The closed circuit ensures that the electrical current remains confined within the wires.

(196) The electrosurgical unit delivers high-frequency electrical current to the surgical site.

(197) The commutators were carefully calibrated to ensure precise control of electrical current.

(198) Overload protection is crucial in preventing fires caused by excessive electrical current.

(199) The ac generator's design includes coils of wire and magnets to induce electrical current.

(200) The electrician will calibrate by way of the multimeter to measure the electrical current.

(201) The oscillograph showed a steady sine wave pattern indicating a stable electrical current.

(202) The engineer developed a device capable of inverting the polarity of an electrical current.

(203) The electrical current delivered by the stimulate electrode helped improve muscle function.

(204) The closed circuit ensures that the electrical current remains contained within the system.

(205) If the electrical capacitor is faulty, it can cause fluctuations in the electrical current.

(206) The technician adjusted the waveshape of the electrical current to optimize its efficiency.

(207) The electrician used a clamp meter to clamp onto a tool and measure its electrical current.

(208) The experiment required the measurement of microvolts of electrical current in the circuit.

(209) Electric resistance is a property of materials that inhibits the flow of electrical current.

(210) Induced voltage is used in electromagnetic relays to control the flow of electrical current.

(211) The flow of electrical current can be affected by the length and thickness of the conductor.

(212) The fuse off mechanism is designed to cut off the electrical current in case of emergencies.

(213) The pulse amplitude of the voltage signal determined the strength of the electrical current.

(214) The interferential machine delivers a low-frequency electrical current to the affected area.

(215) The process of fulguration involves the use of electrical current to destroy abnormal tissue.

(216) The photodiode is a type of semiconductor device that converts light into electrical current.

(217) The ground cable is responsible for diverting excess electrical current safely into the ground.

(218) The unifilar method of measuring electrical current is commonly used in laboratory experiments.

(219) The purpose of a lightning arrester is to divert the electrical current from a lightning strike.

(220) The distributor cap is responsible for routing the electrical current to the correct spark plug.

(221) The monomolecular layer of insulation on the wire prevented electrical current from leaking out.

(222) Electromotive force is the driving force behind electrical current, and it is measured in volts.

(223) The sweat test is performed by applying a small electrical current to stimulate sweat production.

(224) The waveshape of the electrical current changed when a capacitor was introduced into the circuit.

(225) Nonconductive barriers are used to prevent electrical current from flowing through certain areas.

(226) Superconductors have the ability to carry large amounts of electrical current without overheating.

(227) The movement of free electrons is essential for electrical current, but it can also generate heat.

(228) The electrical current was too strong for the device, causing it to short circuit and malfunction.

(229) The resistance of a conductor determines the amount of electrical current that can flow through it.

(230) Bioelectrical impedance is a measure of how easily an electrical current can pass through the body.

(231) The ionization of atoms in a semiconductor material can lead to the generation of electrical current.

(232) A magnetic amplifier is a device that uses magnetic fields to control the flow of electrical current.

(233) The magnetic force of a transformer is what allows it to change the voltage of an electrical current.

(234) The ground cable is responsible for diverting excess electrical current away from sensitive equipment.

(235) Dielectrics are often used as insulators to prevent electrical current from flowing through a circuit.

(236) Electrochemical impedance is a measure of the resistance to the flow of electrical current in a system.

(237) The thickness of the metal layer in electroforming can be controlled by adjusting the electrical current.

(238) The conductance of a circuit element is a measure of its ability to allow the flow of electrical current.

(239) The electrical current flowing through the wires was too strong, so the fuse blew and the power went out.

(240) The superconductive state allows for the transmission of large amounts of electrical current without loss.

(241) The electrical current running through the wires was strong enough to electrocute anyone who touched them.

(242) The galvanoscope is a sensitive instrument that can detect even the smallest changes in electrical current.

(243) As the electrical condenser discharges, it releases the stored energy in the form of an electrical current.

(244) Superconducting materials have the ability to carry large amounts of electrical current without overheating.

(245) The quantum efficiency of a photodiode determines how efficiently it converts photons into electrical current.

(246) The brightness of a light bulb is typically proportional to the amount of electrical current flowing through it.

(247) The phototonus process involves the absorption of photons by a material, which then generates an electrical current.

(248) The magnetic field of a magnet can be used to create a transformer that changes the voltage of an electrical current.

(249) The electrical current flowing through the water posed a serious risk of electrocution to anyone swimming in the pool.

(250) Cathodic protection is a technique used to prevent corrosion, but it requires a constant source of electrical current.

(251) The electrical current follows the line of least resistance, taking the path of least resistance to complete the circuit.

(252) Noncontact voltage testers are used by electricians to detect the presence of electrical current without touching the wires.

(253) The supercurrent in the superconducting wire was able to carry a large amount of electrical current without any loss of energy.

(254) Electromotive force is the driving force behind electrical current, but it can only be sustained if the circuit remains closed.

(255) When a photon strikes a solar panel, it creates an electrical current, and this current can be used to power homes and businesses.

(256) The electrical current flowing through the wires can be dangerous if not handled properly, which is why safety precautions must always be taken.

(257) Iontophoretic therapy, which involves the use of a small electrical current, can effectively deliver medication into the deeper layers of the skin.

(258) Cathodic protection is a technique that involves the use of an external electrical current, which is applied to a metal surface to prevent corrosion.

(259) The conductivity of a solution can be measured using a conductivity meter, which works by measuring the flow of electrical current through the solution.



Electrical Current meaning


Electrical current is a term that refers to the flow of electric charge through a conductor. It is an essential concept in the field of electrical engineering and is used in a wide range of applications, from powering homes and businesses to operating complex machinery and equipment. If you are looking to use the term "electrical current" in a sentence, there are a few tips that can help you to do so effectively. Here are some key things to keep in mind:


1. Understand the meaning of the term: Before you can use the term "electrical current" in a sentence, it is important to have a clear understanding of what it means. As mentioned above, electrical current refers to the flow of electric charge through a conductor. This can be either direct current (DC), which flows in one direction, or alternating current (AC), which changes direction periodically.


2. Use the term in context: When using the term "electrical current" in a sentence, it is important to provide enough context so that the reader or listener understands what you are referring to.

For example, you might say something like, "The electrical current in the wire was too high, causing it to overheat." This sentence provides context by specifying that the electrical current is in a wire and that it is causing a problem.


3. Be precise: When using technical terms like "electrical current," it is important to be precise in your language. Avoid using vague or imprecise terms that could lead to confusion.

For example, instead of saying, "There was a lot of electricity flowing through the wire," you might say, "The electrical current in the wire was measured at 10 amps."


4. Use examples: If you are explaining the concept of electrical current to someone who is unfamiliar with it, using examples can be helpful.

For example, you might say, "Think of electrical current like water flowing through a pipe. The current is like the water, and the wire is like the pipe."


5. Avoid jargon: While it is important to use precise language when discussing technical concepts like electrical current, it is also important to avoid using jargon that might be unfamiliar to your audience. If you are speaking to someone who is not familiar with electrical engineering, for example, you might need to explain terms like "conductor" or "voltage" before using them in a sentence.

Overall, using the term "electrical current" in a sentence requires a clear understanding of the concept and the ability to communicate that understanding effectively. By following these tips, you can use the term with confidence and clarity in a wide range of contexts.





The word usage examples above have been gathered from various sources to reflect current and historical usage of the word Electrical Current. They do not represent the opinions of TranslateEN.com.