Ohmic in a sentence

  • Sentence count: 39
  • Posted:
  • Updated:

Synonym: resistive, electrical.

Meaning: Relating to Ohm's law, which states the relationship between voltage, current, and resistance.


Ohmic in a sentence

(1) The ohmic drop across the diode was found to be negligible.

(2) The ohmic heating effect in the wire caused it to glow red hot.

(3) The ohmic value of the resistor was calculated using Ohm's law.

(4) The ohmic resistance of the circuit was measured using a multimeter.

(5) The ohmic heating element quickly heated up the water in the kettle.

(6) The ohmic resistance of the wire was measured using a Wheatstone bridge.

(7) The ohmic behavior of the insulator prevented the flow of electric current.

(8) The ohmic potential drop across the resistor was calculated using Ohm's law.

(9) The ohmic behavior of the material allowed for accurate voltage measurements.

(10) The ohmic resistance of the thermistor decreased with increasing temperature.



Ohmic sentence

(11) The ohmic behavior of the material was studied by varying the applied voltage.

(12) The ohmic load resistor was used to simulate the electrical load in the circuit.

(13) The ohmic heating effect in the filament of an incandescent bulb produced light.

(14) The ohmic contact between the two metals ensured a stable electrical connection.

(15) The ohmic resistance of the coil limited the current flowing through the circuit.

(16) The ohmic contact between the metal plates ensured a strong electrical connection.

(17) The ohmic losses in the power supply were reduced by using high-quality components.

(18) The ohmic characteristic of the diode allowed current to flow in only one direction.

(19) The ohmic heating effect was observed in the wire when current was passed through it.

(20) The ohmic behavior of the conductor allowed for efficient transfer of electrical energy.




Ohmic make sentence

(21) The ohmic value of the resistor was chosen to limit the current flowing through the LED.

(22) The ohmic value of the resistor was adjusted to control the speed of the electric motor.

(23) The ohmic losses in the power transmission line were minimized through proper insulation.

(24) The ohmic characteristic of the inductor allowed it to store and release magnetic energy.

(25) The ohmic resistance of the circuit was calculated by dividing the voltage by the current.

(26) The ohmic losses in the transmission line were minimized by using high-quality conductors.

(27) The ohmic contact between the battery terminals and the wires ensured a reliable connection.

(28) The ohmic characteristic of the capacitor allowed it to store and release electrical energy.

(29) The ohmic heating effect in the heating coil of an electric stove produced heat for cooking.

(30) The ohmic value of the resistor determined the amount of current flowing through the circuit.



Sentence of ohmic

(31) The ohmic contact between the switch terminals and the wires ensured proper circuit operation.

(32) The ohmic characteristic of the resistor allowed for precise control of current in the circuit.

(33) The ohmic value of the variable resistor was adjusted to vary the brightness of the light bulb.

(34) The ohmic behavior of the semiconductor material made it suitable for use in electronic devices.

(35) The ohmic losses in the power transformer were reduced by using high-quality magnetic materials.

(36) The ohmic resistance of the circuit increased when the temperature of the conductor was lowered.

(37) The ohmic losses in the electrical distribution system were minimized through regular maintenance.

(38) The ohmic contact between the transistor terminals and the circuit board ensured proper functioning.

(39) The ohmic contact between the battery terminals and the wires was checked for any loose connections.



Ohmic meaning


Ohmic is an adjective that is derived from the term "Ohm," which is the unit of electrical resistance in the International System of Units (SI). It is used to describe a specific type of electrical behavior or characteristic in a circuit or material. When a material or component is said to be ohmic, it means that its resistance remains constant regardless of the applied voltage or current. Here are some tips on how to use the word "ohmic" or the phrase "ohmic behavior" in a sentence:


1. Scientific context: In scientific or technical writing, you can use the term "ohmic" to describe the behavior of a material or component in an electrical circuit.

For example, "The copper wire exhibited ohmic behavior, as its resistance remained constant even with varying current levels."


2. Electrical engineering: When discussing electrical circuits or devices, you can use "ohmic" to describe a component that follows Ohm's law, where the voltage across it is directly proportional to the current flowing through it. For instance, "The resistor in this circuit is ohmic, meaning its resistance remains constant regardless of the applied voltage."


3. Material properties: If you are writing about the properties of a specific material, you can mention its ohmic behavior.

For example, "Graphite is known for its ohmic behavior, making it an excellent choice for electrical contacts and electrodes."


4. Non-ohmic behavior: You can contrast the term "ohmic" with "non-ohmic" to describe materials or components that do not follow Ohm's law. For instance, "The diode exhibits non-ohmic behavior, as its resistance changes with the applied voltage."


5. Experimental observations: If you are conducting an experiment or analyzing data, you can use "ohmic" to describe the observed behavior of a circuit or material.

For example, "The voltage-current graph of the circuit showed a linear relationship, indicating ohmic behavior."


6. Circuit analysis: When analyzing a circuit, you can use "ohmic" to describe a component that can be modeled as a resistor. For instance, "To simplify the circuit analysis, we replaced the complex component with an equivalent ohmic resistor."


7. Ohmic heating: In the field of food processing or industrial applications, you can mention "ohmic heating" as a method of heating using electrical resistance.

For example, "Ohmic heating is a promising technology for rapid and uniform heating of food products." Remember to always provide context when using the word "ohmic" or the phrase "ohmic behavior" to ensure clarity and understanding. Additionally, it is important to use the term accurately and appropriately within the specific field or context in which it is being used.





The word usage examples above have been gathered from various sources to reflect current and historical usage of the word Ohmic. They do not represent the opinions of TranslateEN.com.