Rpm in a sentence
Synonym: frequency.
Meaning: Revolutions per minute; a measure of the frequency of rotation; significant in mechanics.
(1) The engine's torque out at 3000 RPM.
(2) The record player spins at a constant rpm.
(3) Do not exceed the lathe's maximum RPM rating.
(4) The mechanic had to boost down the engine's RPM.
(5) The car's RPM would spike around on steep hills.
(6) The engine's RPM stabilised off at a steady rate.
(7) I often shift for a lower RPM during city driving.
(8) The drill bit broke when the rpm was set too high.
(9) The engine's rpm decreased as the car went uphill.
(10) The car's engine revved watt over its maximum RPM.
Rpm sentence
(11) The motorcycle's engine revved up to a maximum rpm.
(12) The engine's rpm dropped as the car came to a stop.
(13) The tachometer on my car measures the engine's RPM.
(14) The synchronous speed of the fan motor is 1200 RPM.
(15) The hertz level of the car engine indicates its RPM.
(16) The car's engine started to pump up into a high RPM.
(17) The synchronous speed of the alternator is 3000 RPM.
(18) The synchronous speed of the pump motor is 1800 RPM.
(19) Spin up to the maximum RPM and watch the wheels blur.
(20) The periodic wave of a car engine determines its RPM.
Rpm make sentence
(21) The car engine can operate at a maximum RPM of 6,000.
(22) The operating frequency of the car engine is 6000 RPM.
(23) The car engine tends to idle between 800 and 1000 RPM.
(24) The car's RPM dropped as I upshifted to a higher gear.
(25) The rpm of the engine increased as the car accelerated.
(26) The computer's hard drive spins at a speed of 7200 rpm.
(27) The fan's rpm can be adjusted using the remote control.
(28) The windmill's rpm decreased as the wind speed dropped.
(29) The readouts on the tachometer showed the engine's RPM.
(30) The engine's rpm fluctuated as the car idled in traffic.
Sentence of rpm
(31) The car idles between 1200 and 1800 RPM when in neutral.
(32) The generator's rpm increased as more power was required.
(33) The tach on the forklift indicated the RPM of the engine.
(34) I adjusted the rpm of the fan to create a stronger breeze.
(35) The car idles between 3000 and 3500 RPM when accelerating.
(36) The tachometer reading exceeded the recommended RPM range.
(37) I have a tachometer in my car to measure the engine's RPM.
(38) The generator operates at a synchronous speed of 1500 RPM.
(39) The synchronous speed of the compressor motor is 3600 RPM.
(40) The operating frequency of this car's engine is 2,000 RPM.
Rpm meaningful sentence
(41) The engine idles between 1000 and 1500 RPM when warming up.
(42) The rated value of the blender's motor speed is 10,000 RPM.
(43) The car's tachometer displays the current rpm of the engine.
(44) The engine idles between 1500 and 2000 RPM when starting up.
(45) The turntable's speed can be adjusted for 33, 45, or 78 RPM.
(46) The car's engine reached a maximum rpm before shifting gears.
(47) The power tool's rpm can be adjusted to suit different tasks.
(48) The mixer's rpm can be increased to whip cream or egg whites.
(49) The drill's rpm can be set to a low speed for delicate tasks.
(50) The tachometers in our cars help us monitor our engine's RPM.
Rpm sentence examples
(51) The instrument panel of the tractor displayed the engine RPM.
(52) The fan's rpm can be adjusted manually using the control knob.
(53) The tachometer allows me to gauge the engine's RPM accurately.
(54) The aircraft's propeller spins at a constant rpm during flight.
(55) The power drill has a variable speed control to adjust the rpm.
(56) The citrated sample was centrifuged at 3000 rpm for 10 minutes.
(57) The engine can strain up to 5000 RPM before reaching its limit.
(58) The design of a two-stroke engine allows for a higher RPM range.
(59) I always upshift at around 3000 RPM to maximize fuel efficiency.
(60) The electric motor operates at a high rpm to power the machinery.
Sentence with rpm
(61) The clock frequency of a car's engine determines its maximum RPM.
(62) The RPM gauge on the dashboard displayed the speed of the engine.
(63) I prefer to shift for a higher RPM when overtaking other vehicles.
(64) The bike's gears allow the rider to adjust the rpm while pedaling.
(65) The tachometer is calibrated to provide accurate RPM measurements.
(66) The car's engine modulated back to a lower RPM after accelerating.
(67) The car's RPM redlined as the driver shifted gears at high speeds.
(68) The drill operates at a high rpm to quickly bore through materials.
(69) The lathe machine can be set to a specific rpm for precise cutting.
(70) The engine's rpm remained steady as the car cruised on the highway.
Use rpm in a sentence
(71) I could see the RPM dropping as I stepped on the clutch pedal hard.
(72) I use the tachometer to monitor the engine's RPM during long drives.
(73) The tach on the race car indicated the engine's RPM during the race.
(74) The RPM of the airplane engine decreased as it prepared for landing.
(75) The car idles between 2000 and 2500 RPM when cruising on the highway.
(76) The mechanic adjusted the tachometer to ensure accurate RPM readings.
(77) The car idles between 500 and 700 RPM when stopped at a traffic light.
(78) The engine's rpm increased as the driver pressed the accelerator pedal.
(79) The car engine tends to idle up to a higher RPM when it's cold outside.
(80) The tach on the crane truck indicated the RPM of the lifting mechanism.
Sentence using rpm
(81) The car's engine began to modulate down from a high RPM to a lower one.
(82) The throttle valve plays a crucial role in regulating the engine's RPM.
(83) The blender's blades rotate at a high rpm to blend ingredients smoothly.
(84) The engine idles between 900 and 1100 RPM when at operating temperature.
(85) The car's engine started to modulate up from a low idle to a higher RPM.
(86) The tachometers on our motorcycles help us shift gears at the right RPM.
(87) The lysate was clarified by centrifugation at 14,000 rpm for 15 minutes.
(88) The engine was charging up below the normal RPM range and needed tuning.
(89) The RPM of the engine increased as the car accelerated down the highway.
(90) The blender's rpm can be adjusted to achieve different blending textures.
Rpm example sentence
(91) The preload on the valve spring determines the maximum RPM of the engine.
(92) The car's engine was designed to cruise at a low RPM for fuel efficiency.
(93) Many modern tachometers have built-in memory functions to store RPM data.
(94) With the automatic choke engaged, the car's engine idles at a higher RPM.
(95) The tachometry device provided accurate measurements of the machine's RPM.
(96) The technician adjusted the RPM of the machine to optimize its performance.
(97) The RPM of the bike chain was too low, making it difficult to pedal uphill.
(98) The camshaft's rotation speed is directly proportional to the engine's RPM.
(99) Many sports cars have digital tachometers that provide precise RPM readings.
(100) The tachometer was calibrated above the highest RPM expected for the engine.
Sentence with word rpm
(101) The RPM of the generator increased as the power demand in the building rose.
(102) The engine RPM modulates as the driver shifts gears in a manual transmission.
(103) The throttle valve is designed to prevent engine damage due to excessive RPM.
(104) The washing machine's spin cycle reaches a maximum rpm to remove excess water.
(105) The lysate was centrifuged at 10,000 rpm for 10 minutes to remove cell debris.
(106) The RPM of the fan was too low, resulting in poor air circulation in the room.
(107) The biturbo engine provides a seamless power delivery throughout the RPM range.
(108) The carburetor's idle speed screw was turned to increase the engine's idle RPM.
(109) The resuspended cells were pelleted by centrifugation at 5000 rpm for 5 minutes.
(110) The lysates were centrifuged at 10,000 rpm for 10 minutes to remove cell debris.
Sentence of rpm
(111) The RPM of the drill bit was too high, causing it to break through the material.
(112) The RPM of the record player was too fast, causing the music to sound distorted.
(113) The wind turbine generates electricity at a variable rpm depending on wind speed.
(114) Take the foot off the clutch only when the engine has reached the appropriate RPM.
(115) We need to calibrate along the radius of the turbine for accurate RPM measurements.
(116) The RPM of the sewing machine was too high, causing the thread to break frequently.
(117) The fuel injection system ensures consistent power delivery throughout the RPM range.
(118) The variator is responsible for maintaining the engine's RPM within a specific range.
(119) The variator's role is to ensure the engine operates at its most efficient RPM range.
(120) In the technical description, the power tool's voltage, wattage, and RPM are specified.
(121) A technical description of the power tool includes information about its motor power, RPM, and safety mechanisms.
Rpm meaning
RPM, an acronym for revolutions per minute, is a term commonly used in the field of mechanics and engineering to measure the rotational speed of a machine or device. It is a crucial parameter that helps determine the efficiency, performance, and safety of various mechanical systems. In this article, we will explore different tips and examples on how to use the word "RPM" or the phrase "revolutions per minute" in sentences effectively.
1. Understanding the Meaning of RPM: Before incorporating the term into your sentences, it is essential to have a clear understanding of what RPM represents. RPM refers to the number of complete rotations or revolutions a mechanical component makes in one minute. This measurement is often used to describe the speed of engines, motors, turbines, or any other rotating equipment.
2. Using RPM in Technical Descriptions: When discussing technical specifications or describing the performance of a machine, it is crucial to include the term RPM to provide accurate information. For example: - "The motor operates at a maximum speed of 5000 RPM." - "The turbine's RPM gradually increases as the wind speed rises."
3. Comparing RPM Values: To highlight the differences in rotational speed between various machines or components, you can use RPM in comparative sentences. For instance: - "The new model offers a higher RPM range compared to its predecessor." - "The car's engine reaches a maximum RPM of 7000, surpassing its competitors."
4. Discussing Optimal RPM Range: When discussing the ideal or recommended RPM range for a specific device, it is essential to provide context and explain the significance. For example: - "To ensure optimal performance, it is recommended to keep the engine RPM between 2000 and 3000." - "Operating the machine outside the specified RPM range may result in reduced efficiency and potential damage."
5. Describing RPM Variations: Sometimes, it is necessary to describe fluctuations or variations in RPM. Here are a few examples: - "The RPM of the engine fluctuates when the vehicle is idling." - "The machine experienced a sudden drop in RPM, indicating a potential mechanical issue."
6. Using RPM in Safety Precautions: RPM is not only a measure of speed but also a crucial factor in ensuring safety. When discussing safety precautions, incorporating RPM can help convey the importance of maintaining control over rotational speed. For instance: - "Always wear appropriate protective gear when working with machinery operating at high RPM." - "Ensure the RPM is gradually reduced before performing maintenance on rotating equipment."
7. Explaining RPM Conversion: In some cases, it may be necessary to convert RPM to other units of measurement. When explaining these conversions, clarity is key. For example: - "To convert RPM to radians per second, multiply the RPM value by 0.1047." - "The gearbox ratio allows the motor's RPM to be converted to linear speed in meters per second."
8. Using RPM in Non-Technical Contexts: While RPM is primarily used in technical fields, it can also be incorporated into non-technical contexts to add a touch of specificity or to create analogies. For instance: - "The DJ skillfully increased the beats per minute (BPM) to create a higher RPM on the dancefloor." - "The cyclist pedaled with such intensity that his legs seemed to be spinning at an RPM only achievable by professional athletes."
In conclusion, RPM is a versatile term that finds its application in various technical and non-technical contexts. By understanding its meaning and following these tips, you can effectively incorporate the word "RPM" or the phrase "revolutions per minute" into your sentences, providing accurate information and enhancing your communication skills in the field of mechanics and engineering.
The word usage examples above have been gathered from various sources to reflect current and historical usage of the word Rpm. They do not represent the opinions of TranslateEN.com.