Welding in a sentence

(1) Plasma is used in welding.

(2) Plasma is also used in welding.

(3) The welding torch ignited the metal.

(4) Blowtorching can be used for welding.

(5) The element argon is used in welding.

(6) The electron beam is used in welding.

(7) The deaerated gas is used for welding.

(8) Acetylene is commonly used in welding.

(9) The welding torch set aflame the metal.

(10) I used a welding torch to melt it away.

Welding sentence

(11) Blowlamps are commonly used in welding.

(12) Granger is a type of welding equipment.

(13) Plasma is used in some types of welding.

(14) The welding torch created a bright flame.

(15) The gas in the welding torch melts metal.

(16) The laborer was skilled at welding metal.

(17) The robot automatizes the welding process.

(18) The incendiary torch was used for welding.

(19) Hydrogen is used in some types of welding.

(20) The worker was burned by the welding torch.

Welding make sentence

(21) Tungs are small metal rods used in welding.

(22) The blowtorch is a useful tool for welding.

(23) The welding torch produced a beamlike flame.

(24) Insure up with a face shield before welding.

(25) Argon is an element that is used in welding.

(26) The flame on the welding torch was powerful.

(27) The welding torch will incinerate the metal.

(28) A welding torch generates heat to melt metal.

(29) The sparks shoot up beside the welding torch.

(30) The welder examined the welding rod for wear.

Sentence of welding

(31) He wore a boilersuit and goggles for welding.

(32) The laborer was welding metal parts together.

(33) A welding torch is a tool used to join metal.

(34) Plasma can be found in some types of welding.

(35) My uncle's occupational specialty is welding.

(36) The burner on the torch was used for welding.

(37) The rod in the workshop was used for welding.

(38) The gyrotron is used in electron beam welding.

(39) The sparks shoot out around the welding torch.

(40) The welding torch singed off the rusted bolts.

Welding meaningful sentence

(41) The welding torch irradiates beside the metal.

(42) The metal was bescorched by the welding torch.

(43) The welding torch incinerated afire the steel.

(44) Hydrogen is used in welding and metal cutting.

(45) The sparks were sizzling off the welding torch.

(46) The welding torch singed the metal into carbon.

(47) Hydrogen is used in welding and cutting metals.

(48) The sparks scatter off the metal during welding.

(49) The workers are busy welding the steel in place.

(50) The welder assessed the welding helmet for wear.

Welding sentence examples

(51) The welding torch caught fire from improper use.

(52) Winkler is a popular brand of welding equipment.

(53) The welder's mitre was near the welding machine.

(54) The flame on the welding torch melted the metal.

(55) The pipe welding required a high level of skill.

(56) Nitrogen is often used in the welding of metals.

(57) Helium is used in welding and metal fabrication.

(58) The course provides hands-on training in welding.

(59) Direct current is used in some welding processes.

(60) The face shield steamed up over the welding work.

Sentence with welding

(61) The welding torch irradiates inside the workshop.

(62) The welding torch irradiates out of the workshop.

(63) Argons are used in welding and metal fabrication.

(64) Make sure to mask up beneath your welding helmet.

(65) The welding sparks set the garage on blaze afire.

(66) Plasma is used in welding to cut and join metals.

(67) The two pieces of metal were joined with welding.

(68) The ceiling in the metal shop has a welding hood.

(69) She used a blowtorch to kindle the welding flame.

(70) The blowlamp is used to heat up metal for welding.

Use welding in a sentence

(71) The pressurised gas cylinder was used for welding.

(72) The pressurized gas cylinder was used for welding.

(73) The welding torch causes the sparks to spark away.

(74) The welding sparks singed off the worker's gloves.

(75) The emission spectrum of argon is used in welding.

(76) Smooth down the edges of the metal before welding.

(77) The torch had a powerful burner for welding metal.

(78) Plasma is also used in welding and cutting metals.

(79) The technician was skilled in welding metal parts.

(80) Belt up your safety gear before you start welding.

Sentence using welding

(81) Water-gas is commonly used in welding applications.

(82) O2 tanks are used in underwater welding operations.

(83) The metal-to-metal welding formed a seamless joint.

(84) A spark from a welding torch can start a brushfire.

(85) The spark from the welding torch ignited the metal.

(86) Hydrogen is used to make welding and cutting gases.

(87) The flint off the welding torch was bright and hot.

(88) Acetylene is a highly flammable gas used in welding.

(89) The welder ensheaths their eyes in a welding helmet.

(90) Manganese is used in the production of welding rods.

Welding example sentence

(91) The sparks were spurring out from the welding torch.

(92) The brazes used in welding are often made of copper.

(93) He relights the torch to continue welding the metal.

(94) Alumines are used in the production of welding rods.

(95) The airbursts of sparks flew from the welding torch.

(96) The welding sparks set on fire the nearby materials.

(97) An incendiary can be a blowtorch or a welding torch.

(98) Not wearing a face shield while welding is a hazard.

(99) I wore a boilers suit to my welding class last week.

(100) The welding torch seared the metal joint into carbon.

Sentence with word welding

(101) The welding torch sparked up beneath the metal plate.

(102) The wire feed is an essential tool for welding metal.

(103) Dress out in your safety gear for your welding class.

(104) The welding machine generates heat to melt the metal.

(105) The fire was started by a spark from a welding torch.

(106) The electrical condenser is used in welding machines.

(107) Oxyacetylene is commonly used in welding applications.

(108) The sparks were spurring out from the welding machine.

(109) The tungs in the welding machine need to be sharpened.

(110) The smoke over the construction site was from welding.

Sentence of welding

(111) The welding machine radiates heat to join metal parts.

(112) Hydrogen is used in the welding and cutting of metals.

(113) The pipe clamp held the pipes together during welding.

(114) The welder wore protective gloves while welding metal.

(115) The welder strikes a match to ignite the welding torch.

(116) Argon is used in welding to create an inert atmosphere.

(117) Sal-ammoniac is commonly used in soldering and welding.

(118) The wire feed can be used for both MIG and TIG welding.

(119) The welding torch started to flame up around the metal.

(120) We should insure by wearing a face shield when welding.

Welding used in a sentence

(121) The welder used a welding torch to fuse metal together.

(122) The metal plate was able to deflect the welding sparks.

(123) The certification for welding requires safety training.

(124) Krypton is a gas that is used in some types of welding.

(125) The welding rod incandesces as it melts metal together.

(126) The carbon off the welding torch created a bright spark.

(127) The sparker on the welding torch created a strong flame.

(128) The sparker on the welding machine created a strong arc.

(129) I sawed the metal rod into smaller sections for welding.

(130) I learned manual welding techniques in my welding class.

Welding sentence in English

(131) Spot welding is known for its high efficiency and speed.

(132) He used a welding torch to join the two pieces of metal.

(133) Oxyacetylene welding is often used in automotive repair.

(134) The metal was securely joined by welding up from behind.

(135) Aluminum can be welded using various welding techniques.

(136) The welder anodizes the welding equipment for longevity.

(137) The abradants were used to prepare surfaces for welding.

(138) The welding equipment was watercooled to prevent damage.

(139) The welding torch flame cut through the metal with ease.

(140) The laborer used a welding torch to join metal together.

(141) It's important to be careful when using a welding torch.

(142) Safety gear such as goggles should be worn when welding.

(143) The incandescence of the welding torch melted the metal.

(144) Bimetallic welding is used to join two different metals.

(145) The intense heat of the welding torch can liquefy metal.

(146) Argon is commonly used as a shielding gas in arc welding.

(147) The gas jet in the welding torch produced a strong flame.

(148) Manual welding is often used in automotive manufacturing.

(149) The liquid gas is used in welding and cutting operations.

(150) The metal-to-metal welding created a sturdy construction.

(151) He had to douse the welding sparks at the end of the job.

(152) Propene is used as a fuel in welding and cutting torches.

(153) The welder anodizes the welding rods for a smooth finish.

(154) The welding torch caused a scorch around the metal frame.

(155) The metal rod began to deform during the welding process.

(156) The welding torch had a powerful flame that melted metal.

(157) The welder uses welding equipment to join metal together.

(158) The flame on the welding torch melted the metal together.

(159) The ions in a plasma can be used for welding and cutting.

(160) The visor on his welding helmet was heavy and cumbersome.

(161) Argon is a chemical element used in welding and lighting.

(162) The welding machine emitted fire and sparks while in use.

(163) A welding torch emits heat to join metal pieces together.

(164) The welding torch incandesces as it melts metal together.

(165) H2 is used in the welding industry for shielding purposes.

(166) The gas jet in the blowtorch melted the metal for welding.

(167) Acetylene is often used as a fuel for cutting and welding.

(168) The welder used manual welding to join the pipes together.

(169) The welding process requires a steady hand and a keen eye.

(170) The intense heat of the welding torch vaporises the metal.

(171) Boilermaking involves cutting, shaping, and welding metal.

(172) The welder uses a compressor to power their welding torch.

(173) The welding torch was incandescing as it melted the metal.

(174) Bevel with off any excess metal from your welding project.

(175) The welder will operate the welding machine to join metal.

(176) The welding torch can irradiate metal to join it together.

(177) The plasma torch is used in welding and metal fabrication.

(178) He lifted the visor on his welding helmet to take a break.

(179) The welding shop had a flare off that caused a small fire.

(180) The heat under the welding torch melted the metal together.

(181) The technician used manual welding to fix the broken wires.

(182) The welder used manual welding to repair the damaged fence.

(183) Photons can be used in laser cutting and welding processes.

(184) Laser welding offers a high level of control and precision.

(185) The welding torch irradiates beyond the joint being welded.

(186) Abraiders are essential for preparing surfaces for welding.

(187) The two metals will melt together with the welding process.

(188) The aircooled welding torch is lightweight and easy to use.

(189) The plume during the welding process was blindingly bright.

(190) The welder had to hold the metal in place while welding it.

(191) Impair behind the welding torch and you could cause a fire.

(192) Not wearing a face shield while welding can court disaster.

(193) It's important to carefully protect your eyes when welding.

(194) The welding machine gave off sparks as the operator worked.

(195) The gaseous state of argon is used in welding and lighting.

(196) Before welding, file off any rust or debris from the metal.

(197) The flint off the welding torch created a shower of sparks.

(198) She uses a welding torch to make the welds on the iron gate.

(199) He uses a welding machine to create strong and secure welds.

(200) Manual welding requires a steady hand and precise movements.

(201) The artist used manual welding to create a unique sculpture.

(202) Manual welding is a common method used in metal fabrication.

(203) Manual welding requires a high level of skill and precision.

(204) The welder pinched out a spark to start the welding process.

(205) The autoworker was skilled in welding and metal fabrication.

(206) The sandblasts on the steel beams prepared them for welding.

(207) Anorthites are often used in the production of welding rods.

(208) The gasless welding machine uses a plasma arc to join metal.

(209) The metalworks shop offers welding and fabrication services.

(210) Oxyacetylene welding is a popular method for joining metals.

(211) The use of carbon dioxide in welding is a popular technique.

(212) The welding class used dry powder flux to join metal pieces.

(213) The plume during the welding process was a sign of progress.

(214) The mechanic fixed the car's muffler by welding a hole shut.

(215) The eye shield protected his eye during the welding process.

(216) Granger is also the name of a type of clamp used in welding.

(217) The welding torch incandesces the metal, fusing it together.

(218) The acetylene welding process is widely used in construction.

(219) Lasers are commonly used in cutting and welding applications.

(220) The artist used manual welding to bring their vision to life.

(221) The beaminess of the welding torch melted the metal together.

(222) The welding torch required a steady supply of compressed gas.

(223) I had to hammer off the excess metal from my welding project.

(224) Always wear protective gear when welding through thick metal.

(225) The craft of metalworking involves shaping and welding metal.

(226) The welding unit is focused on joining metal pieces together.

(227) A welding torch is a powerful tool for metalworking projects.

(228) The welding class will teach you how to refinish rusty metal.

(229) The welder's accoutrement included a welding mask and gloves.

(230) Plasma is used in plasma TVs, but it is also used in welding.

(231) Fusion welding fuses two pieces of metal together using heat.

(232) The scaffold provided a stable platform for the welding work.

(233) The welding machine requires alternate current to weld metal.

(234) Welding mild steel requires specific techniques and equipment.

(235) The exhaust air from the welding shop contained harmful fumes.

(236) Laser welding is a clean and environmentally friendly process.

(237) The jewelry industry uses laser welding for intricate designs.

(238) Laser welding is a popular choice for creating hermetic seals.

(239) She wore a face shield against sparks in the welding workshop.

(240) The welding machine has a water cooled torch for extended use.

(241) The blue flame on the welding torch melted the metal together.

(242) A blowtorch can start a combustion in a metal-welding process.

(243) The welder used a smoke hood to smoke off fumes while welding.

(244) The nobile gas argon is used in welding and metal fabrication.

(245) The aircooled welding torch is lightweight and easy to handle.

(246) Oxygens are also used in industrial processes such as welding.

(247) The sandblasts on the steel beams made them ready for welding.

(248) Interlock before using the welding equipment to prevent burns.

(249) The welder wore a welding cap to protect his head from sparks.

(250) The swivel on the welding helmet allows for better visibility.

(251) The visor on her welding mask was tinted for added protection.

(252) The welding torch gave a hiss as it melted the metal together.

(253) The use of acetylene in welding dates back to the early 1900s.

(254) It's important to keep the heat out of your eyes when welding.

(255) The welder snapped on his welding mask before starting to weld.

(256) The rotary actuator is often used in automated welding systems.

(257) The collimated electron beam was used in electron beam welding.

(258) She uses a welding mask to protect her eyes while making welds.

(259) The welder used manual welding to fabricate custom metal parts.

(260) The spot welding process requires precise control and accuracy.

(261) The engineer used welding to fuse together the two metal beams.

(262) Liquid oxygen is often used in industrial welding applications.

(263) Oxyacetylene welding is known for its strong and durable welds.

(264) Laser welding is a popular choice for creating seamless joints.

(265) Laser welding is a preferred method for joining thin materials.

(266) The textile industry utilizes laser welding for fabric bonding.

(267) The flam of the welding torch joined the metal pieces together.

(268) The metal parts were securely joined by welding up from behind.

(269) The worktables in the metalworking shop have welding equipment.

(270) The welding sparks singed off the worker's protective clothing.

(271) The eyelid shield protected her eye during the welding process.

(272) The beaminesses of the welding torch melted the metal together.

(273) A blowtorch can be used to start a combustion in metal welding.

(274) The water jacket on the welding torch kept it from overheating.

(275) The heat under the welding torch was melting the metal quickly.

(276) The wire feed is an important component of the welding process.

(277) The edges of the paper started to blacken on the welding torch.

(278) The welding instructor demonstrated how to weld across a joint.

(279) The flame of the welding torch fused the metal pieces together.

(280) The intense heat from the welding torch can burn through metal.

(281) Athermal welding techniques are used in the aerospace industry.

(282) The burnings on the metal were a result of the welding process.

(283) The welding students used a maul for breaking down scrap metal.

(284) The welder had to clean the metal surface before welding on it.

(285) Electrofusion welding is commonly used in the plumbing industry.

(286) Ethene is used as a welding gas in certain industrial processes.

(287) The penetrating power of a blowtorch can melt metal for welding.

(288) The engineer used manual welding to repair the broken machinery.

(289) The welder wore protective gear while performing manual welding.

(290) The blacksmith used manual welding to forge the iron into shape.

(291) Spot welding is a common method used in the automotive industry.

(292) The welding torch caused the metal to blaze up in a molten glow.

(293) The metal pieces were securely joined by welding up from behind.

(294) A blowtorch can quickly start a combustion in a welding process.

(295) The Telsonic sonotrode is a key component in ultrasonic welding.

(296) The welding class required us to bore a hole in the metal sheet.

(297) The wire feed allows for precise control of the welding process.

(298) The spark from the welding torch lit afire the nearby materials.

(299) We use a vacuum test to check the quality of our welding joints.

(300) The flame on the welding torch was too hot and melted the metal.

(301) Hydrogen is used in the production of welding and cutting gases.

(302) The welding torch flame was put off after the job was completed.

(303) I'm having trouble finding the right jig for my welding project.

(304) The welder had to use a welding wire to weld on the metal fence.

(305) The welder had to use a welding flux to weld on the rusty metal.

(306) The workpieces were carefully aligned before the welding process.

(307) The welding torch created sparks as it melted the metal together.

(308) The filament of a welding torch melts metal for joining purposes.

(309) He wore a smock to protect his clothes from sparks while welding.

(310) Manual welding is a skill that takes time and practice to master.

(311) The welder used manual welding to join the metal sheets together.

(312) The incandescence of the welding torch melted the metal together.

(313) The welding process requires a high level of skill and expertise.

(314) The two pieces of metal will joint onto each other using welding.

(315) Many industries rely on laser welding for its accuracy and speed.

(316) The medical field utilizes laser welding for delicate procedures.

(317) The use of ferrules eliminates the need for soldering or welding.

(318) The engineer is predrilling the metal before welding it together.

(319) It is possible to weld with aluminum using a TIG welding process.

(320) The intense heat of the welding torch can vitrify metal surfaces.

(321) He had to douse the sparks from the welding torch to avoid fires.

(322) He had to douse the welding sparks as they flew towards his face.

(323) The welder beadblasts the steel frame before welding it together.

(324) Actinically, the light from a welding torch can cause eye damage.

(325) To start the arc welding process, you must turn on the electrode.

(326) The hot metal seared from the welding torch onto the metal frame.

(327) Acetylenic hydrocarbons are commonly used in welding and cutting.

(328) The visored welding mask protected the worker's face from sparks.

(329) The plume near the engineering lab is from the welding equipment.

(330) Not wearing a face shield while welding is a risk for eye injury.

(331) The metalworker created an artistic sculpture with welding tools.

(332) The welder will operate the welding machine to join metal pieces.

(333) The production of bicycles involves welding and assembling parts.

(334) You should always insure onto your safety goggles before welding.

(335) The thermal energy of a laser can be used for cutting or welding.

(336) Carelessly handling the welding equipment could result in injury.

(337) The mechanic had to flatten the metal before welding it together.

(338) The welder had to use a welding gun to weld on the metal railing.

(339) The inert gases helium and argon are commonly used in arc welding.

(340) The shipyard workers used manual welding to build the ship's hull.

(341) The technician used manual welding to repair the broken machinery.

(342) Welding carbon steel requires specific techniques and precautions.

(343) The welder was seen wielding a welding torch to join metal pieces.

(344) Oxyacetylene welding requires a steady hand and careful technique.

(345) The energy industry benefits from the efficiency of laser welding.

(346) The welder needs to bring up to pressure the gas tank for welding.

(347) The metal was cut up into ten-inch pieces for the welding project.

(348) The cheekpiece on the welding mask protected the eyes from sparks.

(349) The welder used a welding torch to sear onto onto the metal plate.

(350) He had to douse the welding sparks as they landed on his clothing.

(351) The anodizer used a welding technique to join two pieces of metal.

(352) The oxyhydrogen flame is used in welding and cutting applications.

(353) The boilermaker used a welding torch to repair the damaged boiler.

(354) The submillimetre laser is used in industrial cutting and welding.

(355) The welding project required students to cauterize beside a torch.

(356) The student practiced welding across different types of materials.

(357) The welder used a batten to hold the metal in place while welding.

(358) The welder used the air hose to cool down the metal after welding.

(359) The clang in the welding lab was a familiar sound to the students.

(360) The welder had to wear protective gear while welding on the metal.

(361) Inert gases are often used as shielding gases in welding processes.

(362) Manual welding is a cost-effective method for small-scale projects.

(363) I have been practicing my spot welding skills with the spot welder.

(364) The robotics industry relies on laser welding for precise assembly.

(365) The welder used a toolset with welding torches and protective gear.

(366) The intense heat of the welding torch caused the metal to vaporise.

(367) The mechanic had to flatten completely the metal before welding it.

(368) Welding with aluminum requires a steady hand and precise technique.

(369) Acetylene gas is commonly used in welding and cutting applications.

(370) The use of thoria in welding electrodes improves their performance.

(371) The spark from the welding torch set light to the nearby materials.

(372) The intense heat from the welding torch can burn through the metal.

(373) The welder had to press the welding torch to join the metal pieces.

(374) The conflagration in the shipyard was caused by a welding accident.

(375) The welding program has welding equipment for learning how to weld.

(376) Argon is an inert gas element that is used in welding and lighting.

(377) The visor on her welding mask was adjustable for a comfortable fit.

(378) The filaments in a welding torch are responsible for melting metal.

(379) The rig of the welding equipment was checked for safety before use.

(380) We had to practice welding in order to pass the certification test.

(381) Electrofusion welding is a cost-effective solution for pipe joining.

(382) He learned how to make clean and precise welds in his welding class.

(383) Manual welding is a crucial technique in the manufacturing industry.

(384) The spot welding machine applies heat and pressure to create a weld.

(385) The spot welding technique is widely used in the aerospace industry.

(386) Spot welding is commonly used in the fabrication of metal furniture.

(387) The welding process requires a high level of precision and accuracy.

(388) Laser welding is a reliable method for joining dissimilar materials.

(389) The welder used a welding torch to sear onto around the metal joint.

(390) He had to douse the welding sparks by extinguishing them with water.

(391) The workers had to hoist the steel pipes at the factory for welding.

(392) The welding process requires deoxidized materials for a strong bond.

(393) The welding class requires students to learn how to use a wire feed.

(394) The welding sparks caused the nearby materials to catch singe afire.

(395) The welder used his welding equipment to join metal pieces together.

(396) Not wearing a face shield while using a welding machine is a hazard.

(397) The welder knows how to handle different types of welding equipment.

(398) The welder decided to buy up new equipment for the welding business.

(399) You should wear a welding helmet if you work with welding equipment.

(400) The use of acetylene in welding can produce a bright, intense light.

(401) The welding lab has an air compressor to power their plasma cutters.

(402) You can buy up to three sets of safety gear for the welding program.

(403) The welding instructor taught us how to weld in different positions.

(404) The welding instructor demonstrated how to weld on a piece of metal.

(405) The welder had to use a welding electrode to weld on the metal gate.

(406) Rutile is commonly used as a coating material for welding electrodes.

(407) The arcing sparks from the welding machine created a shower of light.

(408) The incandescent sparks from the welding machine lit up the workshop.

(409) The spot welder is a versatile tool for various welding applications.

(410) Spot welding is a cost-effective method for joining metal components.

(411) The cathode ray is used in electron beam welding to join metal parts.

(412) The welding process requires a steady hand and a steady flow of heat.

(413) The fulgurous sparks from the welding machine flew in all directions.

(414) The leaping sparks from the welding machine illuminated the workshop.

(415) Laser welding is a precise and efficient method of joining materials.

(416) Apply sodium to the metal surface before welding for a stronger bond.

(417) Autotransformers are used in welding machines for voltage adjustment.

(418) The welder joined the two pieces of metal by welding the hinge aside.

(419) The dry ice began to sublimate beneath the heat of the welding torch.

(420) The mig welding process is widely used in the manufacturing industry.

(421) Ferromolybdenum is also used in the production of welding electrodes.

(422) The spark from the welding torch can ignite quickly and cause a fire.

(423) The welder powdered up unto the welding torch to prevent overheating.

(424) The welding lab is equipped with state-of-the-art wire feed machines.

(425) The weld apart technique is not suitable for welding thick materials.

(426) The artist used a welding torch to weld together the metal sculpture.

(427) The metal undergoes a process of welding to join two pieces together.

(428) The laborer was skilled in welding and could repair metal structures.

(429) Not wearing protective eyewear while welding is a risk of eye injury.

(430) Buffing down the metal before welding it will create a stronger bond.

(431) It's important to flint off any excess metal shavings before welding.

(432) The flint off the welding torch was so bright it was hard to look at.

(433) The welder had to hammer in the welding rod to join the metal pieces.

(434) The welder had to rod out the welding gun to remove the slag buildup.

(435) I had to wear protective gear while welding in order to avoid injury.

(436) Always double-check your work when welding out to avoid any mistakes.

(437) The smoke-filled construction site was a result of a welding accident.

(438) Spot welding is commonly used in the construction of steel structures.

(439) Oxyacetylene welding is a skill that requires practice and experience.

(440) The aerospace industry benefits greatly from the use of laser welding.

(441) The two metal parts were permanently joined by welding up from behind.

(442) The dry suit is a necessary piece of equipment for underwater welding.

(443) Iron during the welding process is used to join metal pieces together.

(444) The welder joined two metal pieces with a welding rod at the workshop.

(445) The steel beams were flattened by machine to prepare them for welding.

(446) The mechanic used a welding torch to coapt the metal parts of the car.

(447) Argons are noble gases that are commonly used in welding and lighting.

(448) The welding project caused a flame up behind the engineering building.

(449) The intense heat caused the metal to gasify beneath the welding torch.

(450) The welder had to use a welding rod to weld together the metal pieces.

(451) The flame on the welding torch fused the two pieces of metal together.

(452) The blackened edges of the metal were a result of the welding process.

(453) The mechanic repaired the car's exhaust system by welding a hole shut.

(454) The singe of the welding torch brought beads of sweat to his forehead.

(455) The welding lab has a bandsaw for cutting through metal rods and bars.

(456) Make sure to gear on your gloves before starting your welding project.

(457) The intense heat from the welding torch caused the metal to blister up.

(458) Electron beam welding is a technique used to join metal parts together.

(459) Spot welding is a fast and efficient way to join metal sheets together.

(460) The cathode ray is used in electron beam welding to join plastic parts.

(461) The use of laser welding has revolutionized the manufacturing industry.

(462) The marine industry uses laser welding for its resistance to corrosion.

(463) The welder used a clamp on the metal to hold it in place while welding.

(464) The sparks from the welding torch spit off from the metal being joined.

(465) The sparks from the welding torch spit off from the metal being welded.

(466) The sparks shoot out from the welding mask, illuminating the work area.

(467) Scald the surface of the metal before welding to remove any impurities.

(468) The Telsonic welding machine is known for its precision and efficiency.

(469) The welder used a spark-gap to create a high-intensity arc for welding.

(470) My brother wants to enroll in a welding program to learn a trade skill.

(471) Beadblasting is a great way to prepare surfaces for welding or brazing.

(472) To weld with aluminum, you need to use a specialized welding technique.

(473) The welder used hot-metal welding to join two pieces of metal together.

(474) The welder used a deoxidising flux to prevent oxidation during welding.

(475) The ironworker used his welding skills to join the iton beams together.

(476) The oxyacetylene flame can be adjusted to suit different welding needs.

(477) He tightened the vises on the metal pipes before welding them together.

(478) Although acetylene is highly flammable, it is commonly used in welding.

(479) The flame of the welding torch joined the two pieces of metal together.

(480) The weld apart method is not recommended for welding high-stress areas.

(481) If you don't wear protective gear, you'll vaporize in the welding shop.

(482) The welding caused the metal to blacken above the area being worked on.

(483) The welder had to use a welding wire to weld together the metal pieces.

(484) The metal fabricator used a welding machine to join the pieces together.

(485) He uses different welding techniques to create different types of welds.

(486) The technician used manual welding to connect the electrical components.

(487) Manual welding is a traditional method that has been used for centuries.

(488) Spot welding is a popular choice for joining thin metal sheets together.

(489) Spot welding is a reliable method for creating strong and durable welds.

(490) Spot welding is a key process in the manufacturing of automotive frames.

(491) The sparking welding machine was used to join two metal pieces together.

(492) Laser welding is a popular choice for creating strong and durable welds.

(493) The construction industry has adopted laser welding for its versatility.

(494) Laser welding is a cost-effective solution for many manufacturing needs.

(495) Laser welding is a reliable method for joining heat-sensitive materials.

(496) The ship was built by welding up the hull from in front of the shipyard.

(497) Some deoxidizers are specifically designed for use in welding processes.

(498) The nonexplosive gas is commonly used in welding and cutting operations.

(499) Tetraborate is used in the creation of fluxes for soldering and welding.

(500) Welding with aluminum requires the use of a specialized welding machine.

(501) The metal-to-metal welding created a strong bond between the two pieces.

(502) The smoke in for the construction site was caused by a welding accident.

(503) He had to douse the sparks from the welding torch at the end of the job.

(504) He handed the welding torch handle around to each welder in the factory.

(505) The welder used a wire brush to sludge off of the slag from the welding.

(506) The steelworker used his welding skills to repair the damaged machinery.

(507) The element argon is used in welding and as a gas shield in light bulbs.

(508) When welding aluminum, it is important to join with aluminum filler rod.

(509) The welding torch sparked up against the metal, creating a bright light.

(510) Before starting the welding process, make sure to turn on the electrode.

(511) The weldments on the metal gate were reinforced with additional welding.

(512) The welding torch produced a bright ball of fire as it melted the metal.

(513) Cloak up before entering the welding area to protect your eyes and skin.

(514) The process of spot welding involves joining two metal surfaces together.

(515) Spot welding is a widely accepted technique in the metalworking industry.

(516) Laser welding is a time-saving solution for many manufacturing processes.

(517) The mechanic preheated the welding torch before joining the metal pieces.

(518) The sparks from the welding torch ignited the flammable materials ablaze.

(519) The repairman used a welding torch to repair the hull of the metal barge.

(520) The shipyard worker carefully aligned the steel bars before welding them.

(521) The coachbuilding process often involves extensive metalwork and welding.

(522) The welders hoisted aloft the welding equipment to join the metal pieces.

(523) The factory uses automated welding machines to join metal parts together.

(524) The welder's mask was an important accoutrement for safety while welding.

(525) The emission of sparks from the welding machine required protective gear.

(526) The alumins in this welding rod help create a strong bond between metals.

(527) The intense heat of the welding torch had scorched the metal into carbon.

(528) It's important to use the correct gas mixture when welding with aluminum.

(529) The use of nitrogen gas in welding can produce a strong and durable bond.

(530) The intense heat caused the plastic to vaporize beside the welding torch.

(531) The welding equipment is inflammable and requires proper safety measures.

(532) Thermic welding is a technique used to join two pieces of metal together.

(533) The engineering professor advised us to ventilate amid the welding fumes.

(534) The use of acetylene in welding can produce a high-quality, precise weld.

(535) The welding equipment was checked for any signs of combustible gas leaks.

(536) The welding sparks ignited the gas tank, causing it to burst into flames.

(537) Gas in the welding process is used to create strong bonds between metals.

(538) Welding out can be a physically demanding task, so take breaks as needed.

(539) Welding out can be a great skill to have for future career opportunities.

(540) It's crucial to volt down the welding machine after use to prevent fires.

(541) The welder had to singe down the rough edges of the metal before welding.

(542) The welding instructor demonstrated how to fuse tightly the steel plates.

(543) The welding project required me to bevel with up to ensure a strong bond.

(544) The edges of the metal plate were blacken round from the welding process.

(545) The welding project required the student to weld in place several joints.

(546) The welding process involved heating the metal and then welding in place.

(547) The instructor emphasized the importance of safety when welding in place.

(548) The student had to make sure the metal was clean before welding in place.

(549) Alternating current is used in the operation of electric welding machines.

(550) The non-flammable nature of this gas makes it suitable for use in welding.

The word usage examples above have been gathered from various sources to reflect current and historical usage of the word Welding. They do not represent the opinions of TranslateEN.com.